XL-D-11 Water-based General Bottom Sealer

Product Description

Water-based primer is a high-viscosity, two-component primer with excellent water resistance, moisture resistance, and acid-alkali resistance. It has strong adhesion to concrete floors and does not peel off.

Application Scope

Basecoat for floor coatings, effectively sealing the capillary pores of concrete structures, reducing ground moisture and gas permeation, and enhancing the bonding performance between floor coatings and concrete foundations.

Product Proportion

Group A: Group B:Water=3:1：6

Construction Method

Basic polishing, dust management.

Mix A and B components in the container according to the ratio, and stir thoroughly with an electric mixer.

Diluent: Add to the combined total of A and B components while they are thoroughly mixed in groups A and B.150%Add water and mix thoroughly. Once mixed, the material is ready.1Completed within hours.

Application Method: Roll-coating; can be applied if there is no obvious dampness, pooling water, or leakage.

Technical Specifications

Drying table≤6Hour, hard work≤30Hour

Alkaline Resistance48The film is free from blisters and peeling, allowing slight discoloration.

Adhesion, Grade 1

Packaging, Storage, and Transportation

4、Packaging, plastic drum packaging, assorted20、25、50Kilograms and other specifications

5、This product should be5-40°C Storage in a well-ventilated and dry warehouse, storage period for6month

6、Non-hazardous goods, may be transported as general cargo.