XL-M-20Waterborne epoxy wear-resistant varnish
Water-based epoxy varnish, two-component, reaction hardener. It is a green, environmentally friendly, quick-drying surface finish with excellent properties such as high flexibility, high hardness, and wear resistance. Used for transparent sealing of concrete, metal, wood, stone, and resin surfaces.
Usage:
Epoxy flooring, polyurethane flooring, wear-resistant flooring, cement self-leveling flooringHigh-hardness, high-wear-resistant topcoat paint, suitable for commercial flooring such as floorings in buildings, school classrooms, airports, as well as industrial flooring in food factories and machinery factories.
Features:
High luster of the paint film, bright, palladium-free, and difficult transparency; extremely environmentally friendly, free of benzene and formaldehyde,VOCLow odor and non-toxic; water-soluble as a diluent; high hardness and excellent scratch resistance of the coating; excellent wear resistance and long-lasting shine; good flexibility and comfortable touch; good adhesion and resistance to chemicals; quick drying time; excellent outdoor aging resistance.
Technical Specifications:
Density:1.0kg/L(Mixed); Solid Content:49%Mixed;VOCContent:23g/L；
Surface Hardness:4HWear resistance:21mgTensile flexibility:<1mm; Adhesion:0Grade; Aging Resistance:>1000h；
Drying Time: Surface Dry≤2hDiligent work≤12h；
Blending Ratio:A：B=4:1:2(Weight ratio).
User Manual:
Material Preparation: When in use, the temperature of the paint should be5Above °C, mixing requiresAPour materials in proportionBBlended in the material, using mechanical stirring, stirring time at least3Mix to a uniform liquid consistency.
Usage Requirements: When using,A、BAfter the materials are well mixed and evenly blended, they are ready for application.A、BAfter material mixing, it must be40Exhausted within minutes.
Painting Method: Each coating layer is not excessively thick100Micrometers. Can be applied using a short wool roller, or by airless spray gun or with an air spray gun.
Curing Interval: Continue painting after the coating is completely dry. Lower environmental temperatures and higher relative humidity will extend the curing interval and may reduce the surface luster and physical, chemical properties of the coating.
Application Condition: Coating fully cured.25At °C, required7When temperatures are lower or relative humidity is higher, the time for full curing will be extended. Once the coating is fully cured, it can withstand mechanical forces and chemical corrosion.
Packaging, Storage, and Transportation
10、Packaging, plastic drum packaging, assorted20、25、50Kilograms and other specifications
11、This product should be5-40Storage in a well-ventilated and dry warehouse, storage period for6month
12、Not hazardous, can be transported as general cargo.
