XL-M-31Waterborne epoxy general-purpose paint
Water-based epoxy floor paint is a two-component waterborne epoxy resin coating, with a reactive curing type. It is an environmentally friendly green material. It is used for color-sealed surface treatment on concrete, steel, wood, and stone.
Usage:
Eco-friendly epoxy flooring for high construction standards, suitable for underground parking lots, schools, food factories, machinery plants, and power plants. Permanently resolves issues such as construction odor and blistering/detachment in epoxy flooring.
Features:
Multiple colors with a glossy finish
Very eco-friendly, solvent-free, minimalVOC；
Water as a diluent, odorless, and non-toxic.
Strong adhesion to damp substrates, excellent breathability.
The coating offers excellent wear resistance, high surface hardness, and good stain resistance.
Resistant to corrosion from a variety of chemicals including acids, alkalis, salts, oils, and solvents.
Technical Data:
Solids Content:78%(Mixed); Adhesion:1Grade
Wear resistance:32mgSurface Hardness:3H；
Mix Ratio:A：B=3：1：（Weight Ratio）
User's Guide:
Basic Requirements: The basic concrete strength must reachC25The surface must be smooth and dense, free of loose materials, oil stains, and other debris. There should be no condensation on the subgrade surface, nor any standing water. There are no specific moisture content requirements for the ground, but it must meet the strength requirements (generally under normal ventilation conditions, new concrete...14The intensity of the celestial queen).
Material Preparation: When in use, the temperature of the paint should be10Over 5°C, when the temperature is low, it is necessary to pre-warm the various components of the bath, otherwise the paint viscosity will be high, making it difficult to apply. When mixing, it is essential to...APour materials in proportionBBlended in the material, mechanical stirring is used, with a stirring time of at least3Mix to a uniform liquid consistency, stirring time may be appropriately extended based on the environmental temperature.
Usage Requirements:A、BAfter mixing, you can add an appropriate amount of water to dilute and adjust the viscosity as required, for surface sealing and applying putty.A、BThe material must be mixed after blending.60Exhausted within minutes.
Coating Method: Apply using a short-wool roller or with an airless spray gun.
Curing Interval: Continue coating after the coating is completely dry to the touch. Lower temperatures will extend the curing interval, and higher moisture content in the substrate will reduce the surface gloss of the topcoat.
Dry Use Time: Coating fully cured, approximately7On days with lower temperatures, the waiting time will be extended. Once the coating is fully cured, it can withstand mechanical and chemical corrosion.
Construction Requirements: Construction conditions, environment, and subgrade temperature must not be below5° C, not exceeding45°C, relative humidity of the air is less than80%。
Curing Time: Drying time for thin coating, at20At ℃, it is required that:8Hour, at10At °C, it is required that...24Hour.
Material Usage: For use on roll-coating paints, may add5%Diluted with water, paint consumption approximately0.2kg/Sq. meters, lower paint temperature will increase material usage.
Packaging, storage, and transportation
13、Packaging, plastic drum packaging, assorted20、25、50Kilograms and other specifications
14、This product should be5-40°C Ventilated and dry storage, shelf life of12month
15、Non-hazardous goods, can be transported as general cargo.
