2CNC龙门 milling center application
The 2-meter CNC gantry machining center is a mechanical processing equipment integrating advanced technologies such as machinery, electricity, and fluid power. It is mainly used for the processing of planes, curved surfaces, and holes. Widely applied in the rough and finish machining of various complex parts such as plate, box, and frame types in the mechanical manufacturing industry.Offering multi-process machining including milling, boring, drilling, rigid tapping, thread cutting, and countersinking.
2CNC龙门铣床 Price
2The CNC gantry milling machine, as a medium to small-sized equipment in the gantry machining center category, boasts high rigidity and precision. It offers the advantages of flexible product processing and high cost-performance, gaining increasing praise from a wide range of mechanical industry enthusiasts.2The price of CNC gantry milling machines is increasingly being noticed by mechanical enthusiasts. Generally speaking,2The price for a CNC gantry milling machine starts from:50More than ten thousand-70Prices vary widely, starting from tens of thousands, and are highly dependent on the product configuration and model. Factors such as the body design, whether a tool magazine is required, system selection, and whether to add angle heads, etc., can significantly impact the price. If you are considering2The price of a CNC龙门mill, please send detailed specifications to the editor.
2016CNC龙门加工中心 specifications2Milling Machine CNC龙门Photo
Below is2016As an example, let's briefly introduce the龙门 machining center.2Parameters of CNC龙门Milling Center
Name | Unit | HLC2016 |
XYZ axis travel | mm | 2000*1800*800 |
Width between two posts | mm | 1600 |
Spindle face to worktable distance | mm | 150-950 |
Z-axis cutting speed | mm/min | 0-5000 |
Workpiece Table Specifications (Length)× wide | mm | 2200×1000 |
Load Capacity | kg | 4000 |
T-slot (number of slots × slot width × slot spacing) | mm | 7×22×140 |
Rapid relocationX/Y/Z | m/min | 20/20/12 |
Main shaft speed range | r/min | 50-6000 |
Spindle锥孔 | type | BT50-150 |
Disc-shapedChain-Type Tool Magazine (CNC Milling Without Tool Magazine) | BT50-24T/32T | |
Spindle Servo Motor | kw | 15 |
Servo motors for X, Y, Z axes | KW | bis22/3000/bis30/3000 |
Operating System | Taiwan New Era / Fanuc / Siemens (optional) | |
Positioning Accuracy | mm | 500/±0.02 |
Repeatability positioning accuracy | mm | 500/±0.008 |
Gas Source Pressure | MPa | 0.8 |
Electrical Capacity | kW | 30 |
Machine tool contour dimensionsLxWxH) | mm | 7300*4600*5000 |
Machine Tool Weight (Approx.) | T | 20 |
About2Milling numerical control gantry machining center models availableHLC2014Gantry machining centerHLC2518Gate CNC Machining Center,HLC2520龙门 machining centers, etc.
Above is information about Hite Machine Tools2Price of CNC龙门mill2016Full Introduction to龙门Machining Center.
2-meter gantry machining center shipment
