Horizontal machining center machine tool application：
The horizontal machining center is suitable for precision processing in aerospace, automotive, internal combustion engines, household appliances, and general machinery. It is ideal for multi-face milling, drilling, boring, tapping, two-axis, three-axis surface machining, and other multi-process operations. It boasts excellent performance in completing both cavity hole systems and plane processing in a single setup, and is particularly well-suited for turning and boring cavity holes.
Horizontal Machining Center Main Structure and Features:
1. Key components are optimized through finite element analysis, the main cast iron parts feature a stable high-strength cast iron microstructure, and are processed with aging, shot blasting, and tempering to ensure the long-term stability of machine tool accuracy.
2. Machine tools are equipped with an integrated T-shaped casting bed body, gantry columns, and a vertical hanging box main shaft box structure. The bed body features triangular reinforcing ribs internally, resulting in a robust bed structure that provides the machine tool with high rigidity and long-lasting precision stability.
3 high-speed, high-rigidity spindle units combined with servo spindle motors; X/Y/Z axes use high-torque servo motors.
4X/Y/Z feature Taiwan large-diameter, high-precision, high-torque ball screws paired with NSK ball screw matching bearings and high-precision imported locking mechanisms.
5X/Y/Z three-axis guide rail uses Taiwan Hiwin linear guide rail, offering high precision, fast speed, and wear resistance, or can be selected with a rigid track design for strong rigidity as per customer requirements.
Standard Configuration
Japanese Fanuc System, Taiwan Tang Jia Rotary Table, Spindle Center Water Supply Ring Spray, Taiwan Ball Screw, Taiwan Chain-type Tool Magazine, Japanese NSK Bearings, Taiwan Locking Nuts
TOM800 Horizontal Machining Center Specifications:
TOM-HT800Spec.
X, Y, Z axis travel1200 mm*1000mm*1300mm
Distance from the main shaft centerline to the front guide rail of the column50~1050 mm
Distance from spindle face to the flat surface of the worktable150～1450mm
X, Y, Z Cutting Feed Rate1～6000 mm/min
X, Y Rapid Feeding Speed24m/min、24m/min
Z-axis rapid traverse speed22m/min
Spindle speed range50-6000 r/min
Main shaft tapered boreBT50
Spindle Motor15/18.5kW
X, Y Servo Motorsbis30/2000kW
Z Servo Motorbis40/2000kW
Servo Motor for Axis ABis22B/2000kW
Numerically controlled rotary tableNRT-800H
Workbench Specifications (Length x Width)800mm*800mm
Center hole diameter of the card faceΦ60H7mm
Face Height (Horizontal)380mm
Trapezoidal groove width22mm
Tightening hydraulic grease35kg/cm2
Splitting Angle1°/5°/01001° degree
Cutting Precision±4 arc sec
Repeatability accuracy±1 arc sec
Tightening Torque800kg-m
Deceleration Ratio1/180
Face speed11.1r.p.m
Workbench Load Capacity4000kg
Turntable Weight1000kg
Disk/Chain Type Tool Magazine (CNC Milling without Tool Magazine)24/32/40
Workbench T-slot (Number of Slots × Slot Width) Surface Hardening7mm*22mm
Repeatability accuracy300mm/+ 0.005mm
Positioning Accuracy300mm/+0.0075mm
Numerical Control SystemOi-MF
Utilize source gas pressure0.6-0.8 MPa
Machine Tool Outline Dimensions (L×W×H)6600mm*6200mm*4200mm
Machine tool weight26000 kg
TOM500 Horizontal Machining Center Specifications:
TOM-HT500Specification
X, Y, Z axis travel1000 mm*800mm*1100mm
Centerline of spindle to front guide rail of column50~850 mm
Distance from spindle face to the flat surface of the worktable150～1250mm
X, Y, Z Cutting Feed Rate1～6000 mm/min
X, Y rapid feed rate24m/min、24m/min
Z Rapid Feeding Speed22m/min
Spindle Speed Range50-6000 r/min
Main shaft cone boreBT50
Spindle Motor15/18.5kW
X, Y Servo Motorsbis30/2000kW
Z Servo Motorbis30/2000kW
Servo Motor for Axis ABis12B/2000kW
Numerically Controlled Rotary TableNRT-630H
Workbench Specifications (Length x Width)500mm*500mm
Center hole diameter of the card faceΦ50H7mm
Face Height (Horizontal)300mm
Trapezoidal groove width18mm
Tightening hydraulic grease35kg/cm2
Splitting Angle1°/5°/01001° degree
Cutting Precision±4 arc sec
Repetitive accuracy±1 arc sec
Tightening Torque500kg-m
Reduction ratio1/180
Face Speed11.1r.p.m
Workbench Load Capacity1200kg
Turntable Weight300kg
Disc-style/Chain-style tool magazine (CNC milling machines without magazine)24/32/40
Workbench T-slot (number of slots × slot width) surface quenching5mm*18mm
Repeatability accuracy300mm/+ 0.005mm
Positioning Accuracy300mm/+0.0075mm
Numerical Control SystemOi-MF
Utilize source gas pressure0.6-0.8 MPa
Machine Tool Outline Dimensions (L×W×H)5570mm*5180mm*3910mm
Machine tool weight16000 kg
Horizontal Machining Center Image:
