The RF-5/9/12/16/20/26 cubic full-mixed feed mixer is primarily composed of one or two augers. The spiral augers are available in left-hand and right-hand configurations. During mixing, materials are simultaneously cut and mixed from all directions at both ends of the housing towards the center of the mixer. Each spiral thread on the auger is equipped with a cutting blade, which interacts with fixed teeth aligned with the centerline of the feed mixer, cutting and mixing various fibrous forage and straw materials to achieve a粉碎混合均匀 full-mixed feed feeding effect.

Safety, ensure safety.

(1) Prior to use, check if the fuel meets the operating requirements. Before starting the TMR feed mixer, it is necessary to preheat at low speed for 5 minutes. During the preheating process of the TMR feed mixer, the operator should carefully inspect the TMR feed blending equipment for proper operation through visual, auditory, manual, and olfactory means. Operation can only commence once the TMR feed mixer is operating normally.

When using the TMR feed machine, pair it with a forage conveyor for a perfect feed distribution match. The output is directly delivered to the spreader truck, enhancing overall feeding time and saving labor costs. Improving the combination for modern farming is the primary key for dairy farms when selecting TMR feed machine setups.

Forage Conveying; Feeding; Mixing: Conveying

Feeding options typically include loader feeding, forage harvester feeding, mixed feed, and output feeding.

Fodder conveyor, typically with dimensions of 60-80cm width and 6 meters in length, powered by a 3kW motor, belt-driven.

The tmr feed mixer discharges the feed material through the outlet, combining with forage conveyance, and securely delivers it to the feed conveyer for distribution tasks.