PP duct sections are placed on supports one by one and connected sequentially, or they can be joined on the ground to a certain length before being hoisted into position using the whole lifting method. If it's not convenient to hang pulleys or if the site constraints prevent hoisting, the PP duct sections can be pulled up to the scaffolding by rope and then lifted onto the supports to align the flanges for gradual installation. Before the installation of the PP duct sections is complete and the junctions of the风口 and branch pipes are not yet connected, the integrity of the PP duct system should be checked primarily on the main trunk pipe. Before installing the PP ducts, the PP panel manufacturer should remove all internal and external debris and perform cleaning and maintenance tasks. The location, elevation, and direction of the PP duct installation, as well as the quality of the PP panels, should meet the design specifications.

Dyed finish dyeing machine bearings, sliding plates, pads, seals, tension guides, sports goods, snow lining, power sleds, rink flooring, ice rink protective equipment, rectangular external parts, artificial joints, prosthetics, and other refrigeration machinery, shielding plates for nuclear power stations, electroplating parts, ultra-low temperature machinery components

Due to the high viscosity of ultra-high molecular weight polyethylene (UHMW-PE) in its molten state, reaching 108 Pa*s, its flowability is poor, and its melt index is nearly zero. Therefore, it is difficult to process using conventional mechanical methods.

This method allows for the molding of thick, large components in just a few minutes, with processing efficiency many times higher than that of the conventional molding process for ultra-high molecular weight polyethylene (UHMW-PE). To prepare porous membranes, ultra-high molecular weight polyethylene (UHMW-PE) is dissolved in a volatile solvent, continuously extruded, and then subjected to a thermoreversible gel/crystallization process, forming a wet gel membrane. Shanghai PP board, the solvent is then evaporated to dry the membrane. Due to the limiting of the formed skeletal structure, micropores are produced during the drying process, achieving porosity through biaxial stretching without destroying the integrity of the porous structure.


PP Sheet Excellence - Xingchi Pipeline Co., Ltd. - Shanghai PP Sheets supplied by Zhenjiang Xingchi Pipeline Co., Ltd. Journeying Far, Striving Forward. Zhenjiang Xingchi Pipeline Co., Ltd. is committed to becoming a strategic partner that wins together, grows together, and moves forward together with you. We are also determined to become a competitive enterprise, soaring with you and achieving success together!