The gaps in architectural decoration and doors and windows should be sealed on the front side. Additionally, in Anhui's dust-free workshop, according to the GMP certification inspection standards, the interior decoration of the dust-free workshop should meet the following requirements: materials with good airtightness and minimal deformation under temperature and humidity changes should be selected. The dust generation during construction should be controlled, especially in concealed spaces such as suspended ceilings and partition walls, which must be cleaned at all times. No dust-generating decoration work should be carried out in rooms with installed filters. Pay attention to protecting the completed work surface and avoid indentation, hidden cracks, and surface decoration contamination due to impacts,敲打, and excessive water work. The temporary equipment entry of the dust-free workshop should be sealed when not in use to prevent dust and debris from entering. The construction site should ensure good ventilation and lighting. For renovation projects, the original power sources and toxic gas pipelines should be identified and cut off before construction can begin. Safety protection measures should be in place for corrosive liquids used in the production process.

Cleanroom Design Requirements: Avoid concentrating the flow of operators, chemicals, materials, etc.; around the cleanroom, it is advisable to have a buffer zone; the entry and exit of manufacturing equipment should not significantly impact operations. Provide necessary utilities such as water supply and drainage, ventilation, and power supply based on the cleanroom's operational needs. These systems and equipment must be user-friendly and easy to design. In a Class 1000 cleanroom, there should be no interference with the air purification system. Carefully consider the nature of the room's work and the air flow conditions; workshops with high dust emissions are not suitable for ground ventilation, and workshops with high cleanliness requirements should be as far away from other workshops as possible.

Cleanroom interior decoration requirements: Walls and ceiling surfaces should be smooth, flat, non-dust-generating, non-dust-attracting, corrosion-resistant, impact-resistant, easy to clean, and have minimal contours. The junction between walls and floors should be rounded with a radius of 50mm. The wall color should be harmonious and elegant, making it easy to identify contaminants. Cleanroom decoration construction注意事项: Remove impurities thoroughly before installation, maintain surface dryness for cosmetic cleanrooms. Ensure the entry of equipment is always sealed to prevent debris entry. The construction site should have good ventilation and lighting. During cleanroom construction, meticulous and rational installation is required to ensure the correct use of clean production workshops and the implementation of a reasonable management system for maintaining the workshop, achieving a good purification effect and meeting the required cleanliness level.

Anhui Cleanroom - 1000 Class Cleanroom - Anhui Mengjingyuan (Recommended Supplier) provided by Anhui Mengjingyuan Environmental Technology Development Co., Ltd. Located at Room 921, Tianrun Building, Northeast corner of Fu rou Road and Jiao Ding Road intersection, Economic and Technological Development Zone, Hefei City, Anhui Province. Striving and developing amidst the surge of market economy, Anhui Mengjingyuan has earned a good reputation in engineering construction. Anhui Mengjingyuan has obtained the Network Business Alliance Certification, signifying that our service and management levels have reached a new height. All employees of Anhui Mengjingyuan are willing to develop together with people of insight from all walks of life, creating a brighter future.