锥形焊接管接头_Connector_General Hardware Accessories_Hardware Tools_Products_Zhongshang 114 Industry Resources Network

Product Description

I. Overview

锥密封焊接式管接头, suitable for pipeline systems using oil or gas as mediums, with operating temperatures ranging from -25°C to +80°C.
Conical Seal Welded Straight Pipe Fittings, Conical Seal Welded Straight Pipe Threaded Cylinder Pipe Fittings, Conical Seal Welded Straight Pipe Threaded Cone Pipe Fittings, Conical Seal Welded Cone Thread Fittings, Conical Seal Welded 90° Elbow Fittings, Conical Seal Welded Cylinder Pipe Threaded 90° Elbow Fittings, Conical Seal Welded Cone Threaded 90° Elbow Fittings, Conical Seal Welded Cone Thread 90° Elbow Fittings, Conical Seal Welded Both Ends Welded Straight Pipe Fittings, Conical Seal Welded Right Angle Fittings, Conical Seal Welded Tee Fittings, Conical Seal Welded Adjacent Right Angle Fittings, Conical Seal Welded Adjacent Straight Pipe Fittings, dimensions as specified in Figures 1 to 13 and the table.

II. Structural Form

Section 3: Dimensions

Do	d				d1	d2		lo		l
Do	Ⅰ	Ⅱ	Ⅲ	Ⅳ	d1	Ⅰ	Ⅱ	Ⅲ	Ⅳ	Ⅰ Ⅱ	Ⅲ	Ⅳ
8	M12X1.5		R1/8	NPT1/8	4	18		4.0	4.102	12	14	9
10	M14X1.5	G1/4A	R1/4	NPT1/4	6	21	24	6.0	5.786		18	14
12	M16X1.5	G3/8A	R3/8	NPT3/8	7	24	27	6.4	6.09		22
14	M18X1.5	G3/8A	R3/8	NPT3/8	8	27	27	6.4	6.09	14	22
16	M22X1.5	G1/2A	R1/2	NPT1/2	10	30	34	8.2	8.12	14	25	19
20	M27X2	G3/4A	R3/4	NPT3/4	13	36	41	9.5	8.61	16	28	19
25	M33X2	G1A	R1	NPT1	17	41	46	10.4	10.16	18	32	24
30	M42X2	G11/4A	R11/4	NPT11/4	20	55	55	12.7	10.66	20	35	24
38	M48X2	G11/2A	R11/2	NPT11/2	26	60	60	12.7	10.66	22	38	36

Pipe Outer Diameter: OD	l1	L				L1		L2	L3	L4	L5	L6	L7	L8
		Direct Connect Fitting		90-degree elbow fitting		L1
		Ⅰ Ⅱ	Ⅲ Ⅳ	Ⅰ Ⅱ	Ⅲ Ⅳ	Ⅰ Ⅱ	Ⅲ Ⅳ
8	12	48	47	68	67	28	27	27	47	34	54	70	17	≈20
10	14	49	48	72	71	29	28	28	48	40	60	72	19
12		51	50	81	80	30	29	29	50	41	62	75	19
14		59	58	83	82	36	35	35	58	45	65	84	22	≈22
16	19	62	60	90	89	39	37	37	60	47	70	85	23
20	19	68	66	112	110	43	41	41	66	55	80	91	27
25	24	78	76	118	116	48	46	46	76	62	92	100	31
30	24	83	81	152	150	52	50	50	81	68	99	107	39
38	26	92	90	182	180	56	54	54	90	74	110	116	43

Outer Diameter of Pipe: OD	L9	L10	S1	S2	S3	S4	S5	S6	H	R	D	Seal ring
												Gasket	O-ring
												Gasket	End face	Conical thread
8	47	117	21	18		18	16	24	56	20	17	12		7.5X1.8
10	48	120	24	21	24	21	16	27	56	20	19	14	16X2.65	9X1.8
12	50	125	24	24	27	24	18	30	58	24	21	15	8X2.65	11.2X1.8
14	58	142	27	27	27	24	21	30	58	28	23	118	8X2.65	11.8X2.65
16	60	145	30	30	34	27	24	36	60	32	25	22	23.6X2.65	14X2.65
20	66	157	36	36	41	34	27	41	70	45	31	27	30X2.65	18X2.65
25	76	176	46	46	46	41	34	50	110	58	37	33	34.5X2.65	23.6X2.65
30	81	188	50	55	55	46	36	55	130	72	43	42	43.7X2.65	28X2.65
38	90	206	60	60	60	55	46	65	140	90	53	48	50X2.65	36.5X2.65

Outer Diameter of Pipe: OD	JB/T 6381.1	JB/T 6381.2	JB/T 6381.3	JB/T 6381.4	JB/T 6382.1	JB/T 6382.2	JB/T 6382.3	JB/T 6382.4	JB/T 6383.1	JB/T 6383.2	JB/T 6383.3	JB/T 6384.1	JB/T 6384.2
8	0.11		0.10	0.1	0.12		0.12	0.12	0.09	0.16	0.23	0.28	0.27
10	0.13	0.13	0.11	0.11	0.13	0.13	0.13	0.13	0.11	0.19	0.29	0.32	0.31
12	0.15	0.16	0.15	0.15	0.16	0.16	0.16	0.16	0.15	0.22	0.32	0.37	0.36
14	0.18	0.18	0.18	0.18	0.20	0.20	0.19	0.19	0.18	0.24	0.36	0.54	0.44
16	0.24	0.24	0.22	0.22	0.26	0.26	0.24	0.25	0.23	0.32	0.48	0.63	0.62
20	0.47	0.47	0.45	0.45	0.6	0.6	0.58	0.58	0.42	0.59	0.82	0.9	0.85
25	0.95	0.95	0.91	0.91	0.84	0.84	1.09	1.09	0.89	1.05	1.51	1.38	1.33
30	1.18	1.18	1.15	1.15	1.32	1.31	1.32	1.32	1.09	1.3	1.82	1.86	1.75
38	1.26	1.26	1.51	1.51	1.85	1.85	1.78	1.78	1.42	1.82	2.66	2.67	2.35

Conical seal welding tube joint with male threads (metric fine threads and cylinder pipe threads) connection dimensions
The connection dimensions of the cone-sealed welded pipe joint end with thread are shown in Figure A1, A2, and Table A1.

Outer Diameter of Pipe: OD	D		d2		D1		b
Outer Diameter of Pipe: OD	Metric fine threads	Cylindrical Pipe Thread	Metric Fine Thread	Cylindrical pipe thread	Metric Fine Thread	Cylindrical pipe thread	b
8	M12X1.5		18		19		15 17
10	M14X1.5	G1/4A	21	24	22	25
12	M16X1.5	G3/8A	24	27	25	28
14	M18X1.5	G3/8A	27	27	29	28
16	M22X1.5	G1/2A	30	34	31	35
20	M27X2	G3/4A	36	41	37	42	19
25	M33X2	G1A	46	46	47	47	21
30	M42X2	G11/4A	55	55	56	56	23
38	M48X2	G11/2A	60	60	61	61	25

Section 3: Marking Instructions

a. Conical sealing welding straight-through pipe fitting with outer diameter D0 of 20mm:
Pipe joint 20 JB/T6381.1-92
b. 20mm OD Conical Seal Welded Straight Through Cylinder Pipe Thread Fitting
Pipe Fitting 20 JB/T6381.2-92
c.锥密封焊接式 straight-through pipe thread fitting with an outer diameter D0 of 20mm.
Pipe Fitting 20 JB/T6381.3-92
d. Conical sealing焊接 straight-through pipe fittings with an outer diameter D0 of 20mm:
Pipe Fitting, 20 JB/T6381.4-92
Pipe elbow with 20mm outer diameter D0,锥密封焊接, 90° bend fitting.
Pipe joint 20 JB/T6382.1-92
f. 90° Elbow Fitting for Conical Seal Welded Pipe with Outer Diameter D0 of 20mm
Pipe joint 20 JB/T6382.2-92
g. 90° bend pipe fitting with锥密封焊接圆锥 pipe thread, outer diameter D0 of 20mm:
Pipe coupling 20 JB/T6382.3-92
h. 90° Elbow Tube Fitting with Conical Seal Welded Thread, External Diameter D0: 20mm
Pipe connector 20 JB/T6382.4-92
锥密封, 20mm OD straight-through pipe fitting with both ends welded
Pipe connector 20 JB/T6383.1-92
j.锥密封焊接式直角管接头,外径D0: 20mm
Pipe connector 20 JB/T6383.2-92
k. Conical sealing焊接tee pipe fitting with outer diameter D0 of 20mm
Pipe coupling 20 JB/T6383.3-92
Pipe elbow with straight angle connection, tapered seal welding, outer diameter D0 of 20mm:
Pipe Fitting 20 JB/T6384.1-92
Pipe connector with a cone sealing welding style, 20mm outer diameter D0, straight through pipe fitting.
Pipe coupling 20 JB/T6384.2-92

Unit Price	Negotiable
Inquiry	None
Delivery	JiangsuNantong3dayswithin
Brand	Jiang Run
Model	Place an order
Specs	Inquire
Quantity	Place an order
Expiry	Long Valid
Update	2023-04-03 18:02

Qidong Jiangrun Hydraulic Lubrication Equipment Co., Ltd.

锥形焊接管接头

启东江润液压润滑设备有限公司

Merchant Products

Description

You May Like

Latest Info