Water-based pressure-sensitive adhesiveProduct Ingredients:Acrylic acid, butyl acrylate, pure water, ethylene glycol, rosin, ammonium persulfate, initiators, defoamers, preservatives, etc.Product Features:Our factory produces water-based pressure-sensitive adhesives with excellent initial adhesion, strong holding power, high peel strength, good frost resistance, aging resistance, and is non-toxic and odorless. It boasts superior pressure-sensitive properties. Suitable for various types of coating machines, it dries quickly and has good compatibility with pigments.Application Range:Water-based pressure-sensitive adhesives are suitable for diapers, women's products, double-sided tape, labels, packaging, book binding, surface protection films, wood processing, wallpaper, and shoe manufacturing. Particularly effective for making various Bopp sealing tape, foil tape, medical tape, protective film tape, and countertop printing.Environmental Performance:No benzene or heavy metals added, non-toxic and harmless to human body, in compliance with SGS testing standards.Instructions for Use:Suitable for blade and wire rod coating, control the temperature between 80-120 degrees, and it will become transparent after the water evaporates.Speed varies depending on the performance of the coating machine, up to 200 meters per minute.The material must be thoroughly dried before it can be rolled up.Product Performance:Appearance: Milky white liquidSolids Content: 55±1%pH Level: 7-8Tensile strength: >8N/25μmInitial Adhesion (# or cm): ≥15#Viscosity: 70-100 mPa·sCautionary Notes:Do not adjust the high-speed viscosity with tap water; do not mix with other solvent-based materials; not for consumption. In case of contact with eyes or skin, rinse immediately with water. After opening, unused adhesive should be sealed tightly. It is recommended to use a 40-60 mesh filter when applying to the coating machine.