Product Introduction

This product is composed of main components such as the fluid carrier, capacitor core, outer sheath, skirt, flange, and terminal structure. There are measurement taps on the flange, which should be opened for use during partial discharge and dielectric loss factor measurement. It should be reliably grounded during normal operation. The product ends are equipped with equipment clamps.

Reference Standard

·GB/T 4109-2008 "Insulating Sleeves for AC Voltage Above 1000V"

Product Model

Product Features

·Dry-type composite capacitive insulation, oil-free, gas-free, porcelain-free

High dirt resistance level

Terms of Use:

·Ambient Temperature: -50℃ to +50℃

·Altitude: Product design is based on 1000m altitude. When exceeding 1000m, adjustments are made according to GB 311.

· Filtration Grade: Outdoor IV/Indoor III (Special requirements, if any, to be noted)

Key Performance Indicators:

· Applicable rated voltage classes: 12kV, 24kV, 40.5kV, 72.5kV, 126kV, 252kV

·Rated Current: ≤2500A

· Temperature Rise: Not Exceeding 85K

Electrical Testing:

60 Hz frequency withstand, partial discharge testing, dielectric loss, and capacitance

Operations and Maintenance:

Maintenance-free