Product Introduction
This product consists of a carrier body, a capacitor core wrapped with resin-impregnated fibers, a porcelain jacket, a flange, and an end structure. Measurement terminals are fitted on the flange, which are used to open for partial discharge and dielectric loss factor measurements. It should be reliably grounded during normal operation. The product ends are equipped with device clamps.
Reference Standards
·GB/T 4109-2008 "Insulating Sleeves for AC Voltage Above 1000V"
Product Model

Product Features
·Dry-type composite capacitor-type insulation, oil-free, gas-free
·High dirt resistance level
· Good casing mechanical properties

Terms of Use:
· Environmental Temperature: -40℃ to +50℃
·Altitude: Product design is based on 1000m altitude. For altitudes above 1000m, adjustments are made according to GB 311.
·Filth Level: IV (Special requirements, if any)
Key Performance Indicators:
· Applicable rated voltage levels: 72.5kV, 126kV, 252kV
· Rated Current: ≤2500A

































