Product Description
This product is composed of main components such as the carrier, capacitor core, outer sheath, skirt, flange, and terminal structure. The flange is equipped with a measurement tap, which should be opened for use during partial discharge and dielectric loss factor measurements, and should be reliably grounded during normal operation. The ends of the product are equipped with equipment clamps.
Reference Standards
·GB/T 4109-2008 "Insulating Sleeves for AC Voltage Above 1000V"
Product Model
![]RCI]RY0}Z5M[XL[P({CNA5.png](https://www.pinsowang.com/file/upload/202303/04/102944929372.png "1610674746566125.png")
Terms of Use:
·Ambient Temperature: -50℃ to +50℃
·Altitude: Product design is based on a 1000m altitude; corrections are made according to GB 311 when exceeding 1000m.
·Filth Level: Outdoor IV/Indoor III (Special requirements, if any, to be specified)
Key Performance Indicators:
· Applicable rated voltage levels: 12kV, 24kV, 40.5kV, 72.5kV, 126kV, 252kV
· Rated Single-Phase Current: ≤2500A
