Product Introduction:

This product is composed of main components such as the carrier fluid, capacitor core, outer sheath, skirt, secondary winding, bottom housing, and terminal structure. The bottom housing features a measuring tap, which is opened for use during partial discharge and dielectric loss factor measurements. Under normal operation, it should be reliably grounded.

Reference Standards:

·GB 20840.1-2010 "Transformers - Part 1: General Technical Requirements"

·GB 20840.2-2010 "Supplementary Technical Requirements for Current Transformers - Part 2"

Product Model:

Product Features:

·Dry-type composite capacitive insulation, oil-free, gas-free, and porcelain-free

High dirt resistance level

· Maintenance-free

Terms of Use:

·Ambient Temperature: -50℃ to +50℃

·Altitude: Product design is based on 1000m altitude; for altitudes above 1000m, adjustments are made according to GB 311.

·Foulness Grade: IV (Special requirements, if applicable)

Key Performance Indicators:

· Applicable rated voltage levels: 35kV, 66kV, 110kV, 220kV

· Rated One-time Current: ≤8000A

· Temperature Rise: Not exceeding 85K

Rated Secondary Current: 5A, 1A

· Rated Capacity: ≤100VA

· Measuring Accuracy Class of Winding: 0.5, 0.5S, 0.2, 0.2S

· Accuracy of Insulation Protection: 5P, 10P

Electrical Testing:

60 Hz power frequency withstand, partial discharge testing, dielectric loss and capacitance, error testing, voltage-current characteristic testing, polarity testing, open circuit voltage testing, primary winding DC resistance testing, etc.

Operation and Maintenance:

Maintenance-free

Note:

During operation, it is strictly prohibited to open the secondary circuit.