Liaoyang galvanized angle iron prices
Angular steel, also known as angle iron, is a long strip of steel with two sides forming a right angle to each other. It comes in equal and unequal angle steel varieties. Equal angle steel has two sides of equal width. The specifications are indicated by the millimeter measurements of width × width × thickness.
Primarily divided into equal-leg angle steel and unequal-leg angle steel, with the latter further categorized into equal-thickness unequal-leg and unequal-thickness unequal-leg types.
Angle steel specifications are indicated by the size of the side length and thickness. Domestic angle steel specifications range from 2 to 20, with the number indicating the centimeters of the side length. The same number of angle steel often has 2 to 7 different side thicknesses. Imported angle steel specifies the actual dimensions of both sides and the thickness, along with relevant standards. Generally, angle steel with a side length of 12.5 cm or more is considered large, between 12.5 cm and 5 cm is medium, and less than 5 cm is small.
Liaoyang galvanized angle iron prices
Orders for import/export angle steel are typically based on the specifications required in use, with the steel grade corresponding to the carbon structural steel grade. Besides the specification number, angle steel does not have a specific composition or performance series.
Angle steel delivery lengths are available in fixed and multiple sizes. The fixed length options for domestic angle steel vary according to the specification number, ranging from 3~9m, 4~12m, 4~19m, and 6~19m. Japanese-made angle steel has length options from 6~15m.
Liaoyang galvanized angle iron prices
The cross-sectional height of unequal angle steel is calculated based on the width of the longer side of the angle steel. Refers to steel with a triangular cross-section and unequal lengths on both sides. It is a type of angle steel. The side lengths range from 25mm×16mm to 200mm×125mm. It is produced by a hot rolling mill. The general specifications of unequal angle steel are: ∟50*32 to ∟200*125, with thicknesses of 4-18mm.
