I. Product Features:    

    1The product features lightweight high strength, high light transmission rate, resistance to aging, flame retardancy, and waterproof properties.

    2The appearance is smooth, with precise cross-sectional dimensions and customizable cutting lengths. The board surface is coated with a special film, which is resistant to aging and has a long service life.15－20Year.

Product Specifications and Models (Also available for customization as per customer requirements)

    1,Product Thickness:0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm

    2,Color: Pearl White,Ice Blue,Emerald green.

    3,Body Type: Standard body type availableYX35-125-750(V125),YX28-205-820,YX24-210-840,YX21-215-860,YX15-225-900,YX51-380-760Corner Pool,YXB40-320-960,YXB50-480-960,YXB33-250-1000,YXB40-333-1000,YXB45-500-1000,JT7 5-20-980(Wavy Sheet),JT63-16-1010(Wavy Sheet),JT63-16-820(Corrugated sheet)Pending100A variety of board styles.

4,Length: As per customer's request (subject to transportability)

Section 3: Installation Instructions for Light-Transmitting Panels

     1,Roofing completed for the building,Leave space for the skylight panel.,Construction proceeds from the eaves towards the ridge. The skylight panels are directly clipped onto the side wave peaks of the steel plates.

　　 2,Light panels are pre-drilled before installation.,The hole diameter must be larger than the diameter of the fixed screw.6-9mm,For thermal expansion and contraction use.

　　 3,Skylight panels and steel plates when abutted longitudinally,Small must be200mmNo Chinese content provided.,Apply two waterstops.

　　 4,Fixed glazing panels,Must use a good gasket ring,Position it between the screw and the light panel,For waterproof and dustproof protection.

　　 5,After inserting the gasket into the screw.,Drill and secure the joists in place,The task of securing the light panels is now complete.

　　 6,Polycarbonate sheet installation,The position of the light-transmitting panel must be horizontal.,Place a piece1200mmx300mm{LongxWide)Non-slip thick wooden board,Foot on the采光板 guide holes and fixing screws operate,Prohibited from stepping directly on the crest of the wave,To prevent the light panel from warping or cracking.

Section 4: Instructions for Handling Skylight Panels

　　 1,Light panels loading and unloading,Avoid dragging the bottom of the light board against its ends to prevent surface damage to the board.

　　 2,Place polycarbonate sheeting,Be placed on a sturdy and level surface,Each pile must have protective measures at the bottom and ends.,Prohibited from placing heavy objects on it.,To prevent the light board from warping.

　　 3,During the loading and unloading of skylight panels,Every three meters, there must be one person present.,And both hands tightly grasp the sides of the light-transmitting panel,Hands are at the same height as the head.

　　 4,Every2-3One-time block loading.

　　 5,During the process of installing the light panels onto the roof,Absolutely no bending in both longitudinal and transverse directions,To prevent breakage.