Features of iron-sided light boards

 1、Iron-edged light panelThe product is well-known for its excellent aging resistance, and its professional sheet forming technology will leave a deep impression on you.

 2Apply the newly developed fiber-reinforced technology toFRPProduction of colored wave panels,Enable the colored wave board to haveFRPBetter strength and weather resistance for light panels.

 3Under consistent strength conditions,2mmThick fiberglass roofing tiles0.6mmStainless steel offers lower costs and better value for money.

 4The glass fiber reinforced plastic (GRP) roofing tiles exhibit excellent corrosion resistance, boasting superior anti-corrosive properties compared to aluminum-zinc coated steel sheets and stainless steel. Due toFRPColorful wave panels are generally used as roofing materials for buildings and do not come into direct contact with acidic or alkaline liquids. Therefore, they can be used for a long time in buildings exposed to strong acid or alkaline environments.

Galvanized Steel Edge Light PanelInstallation Points

After installation, reserve the space for the light-transmitting panel, and the construction proceeds from the eaves towards the ridge. The light-transmitting panel is directly clipped onto the side wave peak of the steel sheet.

· Galvanized iron edge light panelBefore fixing, the pilot hole must be larger than the diameter of the fixing screw.6-9mmFor thermal expansion and contraction purposes.

· Galvanized Iron Edged Light-Transmitting PanelWhen overlapping steel plates longitudinally, the smaller one must be...200mmOverlap and affix two waterstop strips.

· Galvanized Iron Edge Light-Transmitting PanelWhen fixed, a good gasket must be used between the screw and the light panel to prevent water and dust.

· After fitting the gasket over the screw, secure it into the joist with an electric drill, thus completing the installation of the skylight panel.

· Steel-edged light panelDuring construction, it is strictly prohibited to step directly on the crest of the wave to prevent cracking of the light-transmitting panel. A piece must be placed horizontally on the light-transmitting panel.1200mmx300mm{Longx Wide)Anti-slip thick boards are used for working on the采光 board's guide holes and fixing screws, with feet stepping on them.