FRPCorrosion-resistant roofing material production process and applications
Glass Fiber Reinforced Polyester (GFRP) Sheets, commonly referred to internationally,English writtenFRP（Fiber Glass-Reinforced PlasticsGlass-Fiber Reinforced Plastic (GFRP) is a product made by impregnating glass fiber mats, glass fiber fabrics, or chopped fibers with unsaturated polyester resin, followed by gel curing. It features light weight, high strength, excellent impact resistance, and especially unique light transmittance properties.,Significant in architectural structure lighting and crop greenhouse illumination effects,Excellent corrosion resistance,Excellent weathering resistance,Simplified design,Installation,Simple replacement,Choose colors as required.
FRPCorrosion-resistant roofing membraneInstallation and usage
1.FRPCorrosion-resistant roofing membraneBefore securing, a pilot hole must be drilled, with a diameter larger than the diameter of the fixing screws.6-9mmFor thermal expansion and contraction purposes.
2.FRPCorrosion-resistant roofing membraneUtilize aluminum profile fasteners for fixation,Wavy skylight panels are connected and secured using skylight brackets and self-tapping screws.,Seal with additional adhesive. The position of the light-transmitting panels is usually set in the middle of the span.
3. FRPCorrosion-resistant roofing membraneWhen overlapping steel plates longitudinally, the smaller one must...200mmOverlap and affix two waterstop strips.
4.FRPCorrosion-resistant roofing membraneConnect with self-tapping screws,The cover must be in place. The polycarbonate sheet has significant cold and heat deformation.,Easy to be pierced by self-tapping screws,Therefore, larger holes should be drilled at the points where self-tapping screws are used for the polycarbonate sheet. When installing the light-transmitting panel, consider the expansion and contraction properties of the panel.
5. FRPCorrosion-resistant roofing membraneWhen securing, a good gasket must be used between the screw and the light panel for water and dust prevention. After inserting the gasket into the screw, secure it into the rafter with an electric drill to complete the installation of the light panel.
6.FRPCorrosion-resistant roofing membranePlease provide the Chinese content you would like translated into American English.12mNo need for connection within,Over12mThe need for splicing,Junction length of200 - 400mm,Apply two coats of sealant at the joint.,Bonding tape horizontally without trimming edges,The overlap of the longitudinal color steel plates should be according to the panel type.,Standard Corrugated Steel Sheet,Generally, we don't overthink the finishing touches.,Directly secure it to the color steel panel with self-tapping screws.,Applied Sealant,Edge treatment is required for the interlocking boards.
7.FRPCorrosion-resistant roofing membraneDuring construction, it is strictly prohibited to step directly on the crest of the wave to prevent the light-transmitting panel from cracking. A piece must be placed horizontally on the light-transmitting panel.1200mmx300mm{Longx Wide)Non-slip thick wood boards, where the采光板's guide holes and fixing screws are worked on by stepping on them.
