750-type high-transparency skylight panels function similarly to common glass, mainly used for roof lighting..
1:The shapes can be similar to those of wavy or corrugated steel sheets, and they belong to glass fiber reinforced plastics.,Features as follows::
2:Excellent resistance to breakage, easy to clean, acid and alkali resistant,Easy installation and other features
3:The product features diffused lighting with soft light, high light transmission rate, and effectively blocks the majority of ultraviolet rays.
4:This product is flammable and can quickly expel dense smoke from indoor spaces after rapid combustion during a fire, helping to reduce casualties. It does not produce molten droplets during combustion, effectively protecting the safety of on-site personnel.
Installation:
1.The lighting panel must be pre-drilled before installation, with the hole diameter larger than the diameter of the fixing screws.50%To prevent cracking of the light transmittance panel due to internal stresses caused by thermal expansion and contraction.
2.Skylight panels are secured with aluminum profile clips.,Wave-shaped light瓦 utilizes light瓦 brackets and self-tapping screws for connection and fixation.,Re-seal with additional glue. The location of the light瓦 is typically set in the middle span.
3. The small one must be in place when the采光瓦 is overlapped with the steel plate longitudinally.200mmOverlap and affix two waterstop strips.
4.Skylight panels connected with self-tapping screws,The cover must be in place. The polycarbonate sheet experiences significant cold and heat deformation.,Easy to be pierced by self-tapping screws,Therefore, larger holes should be made at the points where self-tapping screws are driven. When installing the skylight panels, consider the expansion and contraction properties of the panels.
































