Product Introduction

Product Description

The梅花 coupling, also known as a claw coupling, is a widely used type of coupling composed of two metal claw disks and an elastic element. The metal claw disks are typically made of 45# steel, but aluminum alloys are also used in cases requiring high load sensitivity.

Product Real Photos

Product Features

A coupling, also known as a coupling joint, is a mechanical component used to firmly connect the driving and driven shafts of different mechanisms, allowing them to rotate together and transmit motion and torque. It is also sometimes used to connect shafts to other parts (such as gears, pulleys, etc.). Typically, it consists of two halves that are connected by keys or tight fits, secured at both ends of the shafts, and then joined together in some manner. The coupling can compensate for misalignment between the two shafts due to imprecise manufacturing or installation, deformation during operation, or thermal expansion (including axial, radial, angular, or combined misalignment); as well as mitigate impacts and absorb vibrations.

Most commonly used couplings are standardized or dimensioned, typically requiring only the correct selection of the coupling type, determination of the model and size. In case of necessity, load capacity calculations for the vulnerable weak points can be performed; at high rotational speeds, centrifugal force on the outer edge and deformation of the elastic elements must also be verified, along with balance checks, etc.

After-Sales Instructions

• Logistics Distribution

  Negotiable based on actual circumstances.

• 2. Payment Terms

  Negotiable according to customer requirements.

• 3. Return and Exchange Policy

  If there are any disputes upon receiving the product, please contact us promptly for negotiation and resolution.

• 4. Regarding invoicing

  Negotiable according to customer requirements.