Shandong CF Autoclaved Fly Ash Blocks, CF Aerated Blocks, Fly Ash Blocks

ManufacturingCFAutoclaved aerated concrete blocks made of steamed-pressed ceramic powder are primarily composed of ceramic waste, with quicklime and cement as the calcium materials, and aluminum powder (paste) as the foaming agent, resulting in porous silicate blocks through autoclave curing.

ShandongCFVapor-pressed porcelain powder aerated concrete blocks features:

1Construction-friendly: The processing performance of lightweight ceramic powder thermal insulation material is excellent, allowing for sawing, planing, and easy size adjustment on-site; good needle holding property, conducive to the connection and anchoring of panels with the main structure.

2Low shrinkage during drying: Only0.16mm/mLower than sand and gas blocks of the same dry density level.60%Above, it can alleviate issues such as shrinkage and cracking caused by drying and water loss.

3Excellent durability: saturated absorbent products-20℃/6h- +23℃/5h-Frozen-thaw cycle15Next, its quality loss rate is only2.05%Post-freezing strength retention rate maintained89%That is, the freeze resistance coefficient is0.89(Sand block bricks are merely)0.80Natural Carbonization90After the Queen, carbonization coefficient reaches0.91(Sand gas blocks are merely)0.65Freezing and carbonization tests indicate that the lightweight high-strength self-insulating ceramic powder material exhibits excellent durability.

CFBlock applications utilize thin mortar joints for masonry.CFInterior wall blocks can be constructed with thin joint mortar or masonry mortar.CFMasonry at the junction of the main structure should use flexible connections; the filling material should be elastic, and fire-resistant material should be used where fire protection is required. At the junction of different materials, use crack-resistant mortar to press into the durable mesh.