1. Product Overview
This product is a solvent-based formulation with special additives, primarily used for cleaning oil stains, iron shavings, carbon powder, and other contaminants that cause electrical equipment malfunctions.Extend the service life of electrical equipment; prevent equipment failure.
2. Product Features
2.1 Excellent insulation properties, high voltage resistance; can be cleaned while live, without affecting the performance of electrical equipment during the cleaning process.
2.2 Volatile completely with no residue left. Also, it is non-corrosive to various materials that make up electrical equipment.
3. Physical Properties
Appearance: Colorless transparent liquid
Density:0.72
Flash Point: 96℃
4. Product Application
4.1 Electrical Equipment: Used for cleaning motors, generators, distribution switchgear, transformer equipment, switchgear room equipment, large electromagnetic valves, changeover switches, automatic switches, welding machines, and small manual tools with low power ratings. Cleaning these electrical equipment items will not affect their insulation.
4.2 Machinery and Equipment: Used for cleaning machinery and equipment, such as hydraulic machinery cylinders, various filters, gearboxes, bearings, hinge mechanisms, and other mechanical equipment.Stock a variety of metal components.
5. Instructions for Use
5.1 Spray Wash Method
Available Spray Gun. External connection0.4~0.6MP compressed air, after connecting the air gun to the compressed air source, it is crucial to first check for moisture in the air. This can typically be confirmed using the following methods:
Check for fog when the container is empty.
② Spray compressed air onto the dry cement floor to check for water stains.
Spray compressed air onto your palm from a certain distance and feel for any moisture.
If moisture is confirmed in the compressed air, it will affect the cleaning effectiveness, and may even lead to a decrease in insulation, and it is not advisable to clean while the equipment is live.
Before using the cleaning, it is essential to first blow away the dust and impurities adhering to the surface of electrical equipment with compressed air, then Siphon tube intakeS-818 should be cleaned, and after cleaning, it should be dried with air or allowed to dry naturally.
Three-step Cleaning Method: Wind WashCleaning - Air Drying
5.2 Immersion Method: Directly immerse the components of the small electric motor or various mechanical parts into the container filled with the solution. Remove after a few minutes, and then dry with air or let it air dry naturally. Apply lubricating oil to the parts requiring lubrication.
5.3 Cleaning Methods: For mechanical and electrical equipment that cannot be cleaned by soaking or spraying, they can be directly wiped clean or brushed with a brush. After cleaning, air-dry or allow to dry naturally.
5.4 Direct喷射cleaning for steel aerosol cans packaging.
6. Cautionary Notes
6.1 Do not use near open flames. Store in a well-ventilated area below 40°C.
6.2 Avoid prolonged skin contact and inhalation of vapors. In case of accidental contact with eyes, rinse immediately with water.
7. Validity Period
Shelf life: 2 years under intact packaging
8. Packaging
25L per drum Packaging
