Overview
Grundfos TP and TPE vertical pipeline pumps are suitable for a variety of applications. These pumps are single-stage centrifugal pipeline pumps, equipped with standard motors and mechanical seals. They are direct-drive pumps, with the pump and motor being separate units. Consequently, compared to other similar wet rotor pumps, they have lower sensitivity to impurities in the pumped liquid.
Vertical pipeline pumps are available in two large sizes. Note: Multiple specific products are offered for each model. Detailed information about specific products can be viewed on Grundfos' website, WebCAPS.
TP Pump
The standout feature of this pump is its reliability. The standard configuration includes a low-noise, high-efficiency IE2(3) motor. All TP pumps are electro-phoretically treated to ensure excellent corrosion resistance.
TPE Pump
TP pumps and TPE pumps mainly differ in the motor. TPE motors come with built-in inverters, allowing for various control modes. TPE pumps offer multiple advantages, including energy savings and enhanced comfort.
Application Range
Vertical pipeline pumps are suitable for HVAC and heating applications in commercial buildings.
All pumps are single-stage pipeline centrifugal pumps, equipped with standard motors and mechanical shaft seal units. These pumps are direct-drive, with the pump and motor being separate units. Therefore, compared to similar fully-sealed pumps, they have a lower sensitivity to impurities in the pumped liquid.
Features and Benefits
Optimized hydraulic performance
Power consumption reduced
Motors can reduce energy consumption.
2-pole and 4-pole TP pumps ranging from 0.75 kW to 375 kW with IE3 motors available for assembly
Top pull-out design
Easy disassembly for convenient maintenance
Pipe-style design
Unlike end-suction pumps, pipeline pumps can be installed vertically, thereby reducing installation costs and space requirements.
Mechanical and hydraulic balancing impellers (Series 300 and 400)
Mechanical and hydraulic balanced impellers can enhance the service life of motor bearings and shaft seals.
Pump housing and impeller/motor base are all electro-phoresis treated
Corrosion resistance enhanced
TPE and TPED Pumps - Equipped with Built-in Variable Frequency Drive
Power consumption reduced
TPE and TPED motors are compatible with IE3 motors (excluding 4 poles 18.5 kW).
Specs
| Product Name | TP 65-340/2 A-F-A-BAQE-LX1 |
| Product Number | 99122854 |
| EAN Number | 5712607192471 |
Technology
| Pump data based on pump speed | 2920 RPM |
| Rated Flow Rate | 49.1 m³/h |
| Rated Head | 28 meters |
| Maximum head | 340 decimeters |
| Impeller actual diameter | 1.58 inches |
| Axial Seal Code | BAQE |
| Curve tolerance | ISO9906:2012 3B2 |
| Pump Model Version | A |
Material
| Pump Housing | Cast Iron |
| Pump housing | EN-GJL-250 |
| Pump Housing | ASTM class 35 |
| Impeller | Cast iron |
| EN-GJL-200 | |
| ASTM class 30 | |
| Material code | A |
Installation
| Environmental Temperature Range | -30 .. 60 °C |
| Operating Pressure | 16 Bar |
| Pressure at specified temperature | 16 bar / 120 °C |
| Interface Model | DIN |
| Size of connection | DN 65 |
| Pressure rating for pipe connection | PN 16 |
| Port-to-port length | 360 mm |
| Flange size for motor | FF265 |
| Interface Code | F |
Liquid
| Transferred liquid | Water |
| Liquid Temperature Range | 0 .. 120 °C |
| Operating Fluid Temperature | 20 °C |
| Density | 998.2 kg/m³ |
Electrical Data
| Motor Model | 132SA |
| IE Efficiency Grade | IE3 |
| Rated Power - P2 | 5.5 kW |
| Power Frequency | 50 Hz |
| Rated Voltage | 3 x 380-415D/660-690Y V |
| Rated Current | 10.6/6.05 An |
| Starting Current | 920-850 % |
| Cos phi - Power Factor | 0.89 |
| Rated Speed | 2920 RPM |
| Efficiency | IE3 89,2% |
| Motor full load efficiency | 89.2-89.2 % |
| Motor efficiency at 3/4 load | 89.7-89.7 % |
| Motor efficiency at 1/2 load | 88.7-88.7 % |
| Motor Pole Pairs | 2 |
| Packaging Grade (IEC 34-5) | 55 (Protect. water jets/dust) |
| Insulation Class (IEC 85) | F |
| Built-in motor protection | PTC |
| Motor Part Number | 99313151 |
Other
| Minimum efficiency index, MEI ≥ | 0.70 |
| Net weight | 110 kg |
| Gross weight | 128 kg |
| Shipping Volume | 0.39 m3 |
| Sales Region | China |
