The PNA series is an industry-leading high-performance microwave network analyzer, suitable for testing both passive and active devices. It currently offers five frequency models.

Choose from: 13.5 GHz (N5221A), 26.5 GHz (N5222A), 43.5 GHz (N5224A), 50 GHz (N5225A), or 67 GHz (N5227A) to customize the performance grade for your PNA, catering to your specific budget and measurement requirements.

The Keysight PNA is used for testing various passive and active devices such as filters, duplexers, amplifiers, and frequency converters. The PNA boasts high-performance features and is an ideal solution for component characterization and millimeter-wave, signal integrity, and material measurements.

Key Features and Technical Specifications

10 MHz to 43.5 GHz

2 ports (single signal source) or 4 ports (2 built-in signal sources)

127 dB system and 132 dB receiver dynamic range, 100,001 points, 200 channels, 15 MHz intermediate frequency bandwidth

High output power (+13 dBm) and wide power sweep range (38 dB)

Dynamic Accuracy: 0.1 dB compression and +12 dBm input power used at the test interface

At a 10 Hz mid-frequency bandwidth, only -114 dBm of low background noise

Hardware Options:

N5224A-200   Dual Port, Single Source, Basic Hardware Configuration

N5224A-201   Dual-port, Single-source, Configurable Test Set

N5224A-210   Dual Port, Single Source with Metering Configuration

N5224A-217 - Dual-port, Single-Source, Configurable Test Set, Extended Power Range

N5224A-219 - Dual Port, Single Source, Configurable Test Set, Extended Power Range, Bias Configurator

N5224A-400   4-Port   Single-Source   Basic Hardware Configuration

N5224A-401   4-port, Single-Source, Configurable Test Set

N5224A-410   4-Port, Single-Source, with Metering Configuration

N5224A-417   4-Port, Single-Source, Configurable Test Set, Extended Power Range

N5224A-419 4-port Single-Source Configurable Test Set Expanded Power Range Bias Configuration

Optional Accessories:

N5224A-008 Pulse RF Measurement

N5224A-010 Time Domain

N5224A-020 - Add IF Input

N5224A-021 - Add Pulse Modulator to

N5224A-022 - Add Pulse Modulator to

N5224A-025 - Add 4 Pulse Modulators

N5224A-028 Standard Receiver Noise Figure Measurement

N5224A-080 Offset Measurement

N5224A-082 Scalar Calibration Converter Measurement

N5224A-083 Vector and Scalar Calibration Converter Measurement

N5224A-084 Embedded LO Measurement

N5224A-086 Gain Compression Applications

N5224A-087 Intermodulation Distortion Measurement

N5224A-118 - Quick Continuous Wave Mode

N5224A-460 Integrated Mode Application

N5224A-551 N Port Calibration Measurement

N5224A-088 Source Phase Control

N5224A-089 Differential and I/O Device Applications

N5224A-007 Automatic Clamping Device Disassembly

N5224A-015 Dynamic Uncertainty of S-Parameter Measurement

N5224A-090 Spectrum-enabled

N5224A-093 Extended frequency range to 110 GHz

N5224A-094 Extended Frequency Range to Over 110 GHz