Zibo Wannuo Ceramics Co., Ltd. specializes in producing 300mm*600mm, 450mm*900mm, 600mm*600mm, and 600mm*1200mm quartz bricks with a thickness of 2 cm, as well as solid thick antique tiles.
2-inch natural quartz stone features natural textures, colors, grain, and effects, with a tactile and three-dimensional texture. Compared to natural stone, 2-inch quartz tiles offer unparalleled advantages, excelling in physical properties such as water absorption rate and hardness, making them a superior alternative to common stone and a current substitute for natural stone.
2-inch quartz tiles are mainly suitable for: car 4S stores, community walkways and garden roads, commercial squares, hotels, swimming pools, urban roads, bath centers, tourist attractions, large squares, parking lots, villa courtyards, landscape walls, processed steps, commercial real estate walls and floors, and can also be freely cut and processed for exterior walls.
Installation method for 2cm quartz tiles:
The ground is laid with elevated tray installation, which is extremely easy to install and dismantle, facilitating construction and maintenance. It allows for convenient inspection and maintenance of structures below the walking layer, such as electrical cables, water pipelines, etc., thereby reducing construction costs. Particularly suitable for spaces with multiple accessory structures or limited load-bearing capacity, such as outdoors, balconies, attics, etc. (It is recommended to leave a gap of 2-5 millimeters for elevated laying.)
2cm quartz brick installation with an air gap; recommend leaving a gap of 3-5mm, use grout sand for wet installation.
Cleaning Method for 2cm Quartz Tiles:
There is no specific standard for cleaning ordinary tiles. For heavy contamination, soak in dilute oxalic acid (diluted oxalic acid) for a few minutes before scrubbing with a wire brush.
Outdoor Wall Tiling Methods:
Wet bonding and dry hanging methods. Wet bonding is a traditional construction method, but it is used because standard thickness tiles do not meet the dry hanging thickness requirements. Tiles bonded this way often suffer from hollowing, cracking, and falling off, posing safety risks and not suitable for high-rise buildings or commercial structures. Using 2cm tiles for dry hanging avoids these issues and provides excellent heat insulation and preservation. Maintenance is simple and convenient.
Wet bonding and dry hanging methods. Wet bonding is a traditional construction method, not suitable for taller commercial buildings. Bricks may develop cracks, efflorescence, and rust stains, and material detachment may occur, posing a safety risk. Dry hanging can avoid these drawbacks, offering excellent heat insulation and preservation, as well as being safe and easy to maintain.
2cm curtain wall porcelain panel construction process:
Bolt-down, groove-type, adhesive-mounted, and PC (precast concrete ceramic panel facade). Based on the geographical location, climate conditions, height, shape, and surrounding environment of the building, conduct relevant mechanical calculations to determine the installation method of the ceramic panels. Where conditions permit, perform on-site mechanical property tests on the calculation results to ensure the safety of the ceramic panel facade.
The difference between a 2cm curtain wall product and a standard ceramic tile curtain wall:
Product thickness is sufficient at 2cm, allowing for drilling like stone and槽cutting, suitable for various dry-hanging techniques.Excellent wind pressure resistance, destruction strength ≥ 13,000, breaking modulus N ≥ 45 MPa, advanced technology, strong impact resistance, meets the design requirements for curtain wall wind loads; airtightness, watertightness.
2cm product for outdoor curtain walls requires a height specification:
National regulations require technical justification for facade projects with ceramic panels exceeding 100 meters in height, including论证 the feasibility and reliability of the design scheme. The 2cm facade products from WeiGe have been tested by the Guangdong Provincial Academy of Building Research, and all relevant performance standards meet the requirements for building facades. Wind resistance: Level 9, P3 at 5000Pa; Water tightness: Level 5, ΔP at 2000Pa; Air tightness: Level 4, qA ≤ 0.5; Plane deformation: Level 5, r at 1/100.
The 2cm quartz brick main series include: Fuding Black, Sesame Grey, Sesame White, Sesame Black, Gold Sesame, Camellia Gold, Crystal Grey, Medium Grey Sandstone, Dark Grey Sandstone, Beige Sandstone, etc.
Beijing, Tianjin, Shanghai
Hebei Province: Shijiazhuang, Handan, Tangshan, Baoding, Qinhuangdao, Xingtai, Zhangjiakou, Chengde, Cangzhou, Langfang, Hengshui
Shaanxi Province: Xi'an, Yan'an, Tongchuan, Weinan, Xianyang, Baoji, Hanzhong, Yulin, Shangluo
Nei Mongol: Hohhot, Baotou, Jining, Dongsheng, Linhe, Wuhai, Chifeng, Tongliao, Wulanhaote, Xilinhot, Manzhouli, Erlianhaote
Qinghai: Xining
Xinjiang: Urumqi, HamiKashgar, Kuitun, Shihaji, Hami, Kuerle, Changji, Aksu, Hetian, Altay
Jilin Province: Changchun, Jilin City, Bai City, Songyuan, Siping, Liaoyuan, Tonghua, Baishan
Jiangsu Province: Yangzhou, Nanjing, Xuzhou, Lianyungang, Suqian, Huai'an, Yancheng, Taizhou, Nantong, Zhenjiang, Changzhou, Wuxi
2-inch quartz brick bricks are available in standard sizes such as 300*300, 300*600, 600*1200, etc. Custom sizes are available upon request, with styles cut to your preference, offering flexibility and variety.
