Guangdong Yatu Technology Co., Ltd. produces anti-theft doors in Dongguan using Dongguan materials. Fenggang Tangxia Document Room anti-theft doors in Dongguan are made using Dongguan materials. According to requirements, all chemical storage warehouses must install anti-theft doors. Storage areas should use anti-theft safety doors that comply with GB17565-2007 standards, with a safety door level of Class B (inclusive). Storage cabinets should have anti-theft functions and meet the dual-lock management requirements. Mechanical anti-theft locks should be installed, which comply with the relevant functions of GA/73. This means that anti-theft doors must have locks of B grade or higher to meet the requirements. Our company can fully meet these requirements. We are a manufacturer of special doors and windows with 15 years of rich experience, producing explosion-proof and anti-explosion doors, bank vault doors, tunnel protection doors, etc. We have complete certificates. Shenzhen Yatu Security Technology Co., Ltd. produces, sells, installs, and manufactures anti-theft safety doors:

The door leaf structure is as follows, from outside to inside: 1.2mm steel plate frame (wall thickness 1.5mm) + 1.5mm steel plate. Filled with mineral wool, with a reinforced steel mesh inside. The hinge side features 3 visible hinges and 3 fixed bolts, with bolt diameter of 17.5mm and effective projection length of 12mm. The side for opening has 3 movable lock bolts, with a cross-sectional area of 18mm x 10mm and an effective projection length of 20mm. There is one movable door bolt at the top and another at the bottom, with a bolt diameter of 14mm and an effective projection length of 15mm. A FDS-B-888-12 Type B mechanical burglar-proof lock is installed on the door. The installation location of the lock is protected with 3mm reinforced steel plate.