The details of this product are relatively simple and clear. The manufacturer has several explanations regarding this:
1. Regarding product quality. Our factory has been established for nearly 25 years, focusing on the production of water ring vacuum pumps and vacuum pump units. During this period, we have never produced other types of pumps, and we always choose the best accessories. We strictly test the vacuum degree, pumping volume, motor condition, pump operation, etc. before leaving the factory, which is known as "our advantages or why we are chosen". Our factory believes that there is no need or energy to present this in exquisite pictures.
2. Regarding after-sales service: The product has a one-year warranty, and our after-sales team consists of many experienced employees with strong professionalism. There are no after-sales problems that are pushed to customers or caused by working conditions, and we are responsible and conscientious (just selling without repairing cannot last for 25 years). Our factory believes that it is not necessary to present this in the form of exquisite images.
3. Regarding the details of this product, based on years of production and sales experience and customer concerns, our factory has designed a relatively simple design, including company introduction, product structure, operating principle, parameters, application scope, etc. (directly include the details related to these points in the product sample). If you need a size chart, you can refer to the attached manual or consult our factory directly. There is no need to cover everything.
4. Except for the main image of this product, the physical images and related videos in the details are all taken in the workshop without any modifications except for adding our factory watermark.Advocate for practicality and oppose extravagance without substance。The vacuum pump was not invented by any manufacturer. If the assembly accuracy is accurate, the parameters will be the same, only there will be differences in the quality of the accessories.
5. Regarding price: 2The raw materials of SK series water ring vacuum pumps fluctuate frequently, and some customers do not require tax invoices. Therefore, the listed price is the pump head reference price (excluding tax). Please negotiate based on the regional shipping cost, whether it includes tax, and whether it is a complete machine.
Overall, we will work hard to make pumps and sell them effectively. Welcome new and old customers to inquire and purchase.
Shandong Zibo Boshan Daming Vacuum Pump Factory is a designated enterprise of the Provincial Department of Machinery for the production of vacuum equipment. It is a member unit of the China Vacuum Association. Our factory has a district level vacuum research institute and a district level technical supervision bureau vacuum testing center. Our factory has strong technical strength and excellent equipment.
The principle of our factory is "quality first, reputation first", and we passed the ISO9001 quality system certification in June 2000.
The "Daming" brand vacuum pump produced by our factory is renowned for its excellent craftsmanship, stable and reliable performance, and excellent quality in both domestic and international markets. The main products include the sz, szb, sk, 2bv, 2bea, 2bec series water ring vacuum pumps and compressors; 2sk-p1 series two-stage water ring pump - atmospheric jet pump mechanical; 2sy series water ring compressor; w. Wy series reciprocating vacuum pump; WL series vertical reciprocating vacuum pump; x. 2x series rotary vane vacuum pump; ZJ and ZBK series Roots vacuum pumps; Production of JZJ2S series Roots water ring vacuum units and other application equipment, as well as various working pumps. The products are widely used in fields such as machinery, petroleum, chemical, papermaking, food, sugar production, electricity, electronics, metallurgy, ceramics, water diversion, printing and dyeing, and building materials.
Our factory has a sound quality assurance system, accumulated rich experience in design and manufacturing, and has strong independent innovation and development capabilities. Implemented computer-aided management (MIS), computer-aided testing (CAT), and computer-aided design (CAD)
Shandong Boshan Daming Vacuum Pump Factory provides customers with reliable quality assurance through enthusiastic and comprehensive service. All employees of Daming are willing to work together with friends from all walks of life at home and abroad to create brilliance.
Contact Information: Factory Manager: Mr. Yan
Mobile phone number: 18560363286/13070693507 18668993485 (WeChat)
Contact number: 0533-4505958
Contact address: Boshan District, Zibo City, Shandong Province
The 2SK series water ring vacuum pump and compressor are used to suction or compress air and other non corrosive, water-insoluble, and solid particle free gases, in order to create a vacuum and pressure in a closed container.
2SK water ring vacuum pumps and compressors are widely used in the fields of machinery, petrochemicals, food, sugar industry, and electronics. Due to the isothermal compression process of gas during operation, it is less prone to danger when compressing and suctioning explosive gases, making it more widely used.
Product Features
2SK vacuum pump has a compact structure and easy maintenance;
SK vacuum pump has a wide range of applications and can extract various gases including water vapor, flammable, explosive, containing a small amount of dust, and containing a small amount of liquid;
SK vacuum pumps mainly use water as the working medium, with low maintenance costs;
SK vacuum pumps can operate in harsh environments.
performance parameters
The working process of 2SK vacuum pump and compressor and gas water separator is as follows: gas enters the vacuum pump or compressor through the pipeline through the valve, and then is discharged into the gas water separator through the guide pipe, and discharged through the exhaust pipe of the gas water separator. When used as a compressor, the gas water mixture discharged by the compressor is separated in the gas water separator, and the gas is transported to the system that needs to compress the gas through a valve, while the water remains in the gas water separator. In order to maintain a certain water level in the gas water separator, an automatic overflow switch is installed. When the water level is higher than the required level, the overflow switch opens and water overflows from the overflow pipe. When the water level is lower than the required level, the overflow switch closes and the water level in the gas water separator rises to reach the required level. The working water inside the vacuum pump or compressor is supplied by a gas water separator (tap water can also be used), and the amount of water supplied is adjusted by the valve on the water supply pipe.
The only difference between gas suction and pressure delivery systems is the internal structure of the gas water separator. When sucking gas, the pressure at the suction port is lower than atmospheric pressure, while the pressure at the exhaust port is equal to atmospheric pressure. The gas water separator only has an overflow pipe. When compressing gas, the suction port is at normal pressure (or in a vacuum state), and the exhaust port pressure is higher than one atmosphere; To ensure the pressure of the transported gas, the water level of the gas water separator is controlled by an overflow switch.
Structural Description
A vacuum pump is a single-stage, single acting water ring vacuum pump, and is also a structural form of a volumetric vacuum pump that uses water as the working medium.
The main body of a vacuum pump consists of a rotating spindle and impeller, a suction and discharge port base, suction and discharge port disks, pump rings, etc.
The rotating spindle and pump ring are installed eccentrically, and the spindle is equipped with an impeller.
When the impeller rotates, the circulating water entering the pump chamber forms a water ring that is concentric with the pump chamber and eccentric to the impeller. The water ring divides the impeller into several relatively closed spaces in the circumferential direction. As the impeller rotates, the volume of the space will change periodically. With the corresponding coordination of the fixed suction and exhaust ports, the process of suction, compression, and exhaust is completed.
The transmission of the motor and pump parts is achieved through a coupling, and the pump and motor are installed on a common base plate.
According to different process requirements and usage environments, this series of vacuum pumps adopts different material configurations such as stainless steel, carbon steel, cast iron, etc. for users to choose from.
The working vacuum range is -0.03-0.08MPa.
Technical parameters: Model extraction volume (m3/min, ultimate pressure power, WK speed (r/min), water supply volume (L/min), large suction and exhaust ports, and a suction pressure of (-0.093MPa) not less than mmHGMPa2SK-1.51.50.9-730-0.0974144010-15402SK-332-730-0.0987.5144015-20402SK-664-730-0.09815146025-35702SK-12128-730-0.0982297040-501002SK-202014-730-0.0984574060-801252SK-303020-730-0.0985574070-90125
2SK-P1 series two-stage water ring vacuum pump atmospheric jet pump unit
Model Extraction Volume (m3/min) Maximum Pressure Power WK Speed r/min Water Supply L/min Inhalation Pressure -0.093MPA-700mmHg Inhalation Pressure -0.093MPA-700mmHg Inhalation Pressure -0.093MPA-700mmHg mmHGMPa2SK-1.5P11.050.90.75-750-0.0994144010-152SK-3P12.11.81.5-750-0.0997.5144015-202SK-6P14.23.63-750-0.09915146025-352SK-12P18.47.26-750-0.0992297040-502SK-20P1141210-750-0.0994574060-802SK-30P1211815-750-0.0995574070-90
Note:
1. The values in the table are obtained under the following conditions: ① Atmospheric pressure of 0.1013MPa (760mmHg); ② Inlet water temperature 15 ℃; ③ Inhalation air temperature 20 ℃; ④ The relative temperature of the air is 70%.
2. The water supply is the value at a suction pressure of -0.05MPa (-400mmHg), and can be greater than this value at ultimate vacuum
3. Performance tolerance is ± 10%.
5
Equipment installation of 2SK water ring vacuum pump
The installation dimensions of the 2SK series two-stage water ring vacuum pump are shown in Figures 5, 6, 7, and 8.
1. Installation of 2SK water ring vacuum pump:
When the 2SK water ring vacuum pump is delivered to the installation site, if any damage is found or if it is installed 8 months after leaving the factory, it should be disassembled, inspected, and repaired before installation.
Before installation, manually rotate the coupling Lv to confirm if the pump is stuck. The 2SK-0.4 and 2SK-0.8 pumps can be checked by opening the motor cover and rotating the motor fan several times. The foundation of the 2SK water ring vacuum pump should be kept level to ensure that the pump is placed horizontally.
2. Installation of pipeline for 2SK water ring vacuum pump:
The flange connection of the 2SK water ring vacuum pump pipeline should be heated to ensure reliable sealing, especially if there is a slight looseness in the intake pipeline of the 2SK water ring vacuum pump, the predetermined vacuum degree cannot be achieved. The intake pipe near the pump must be equipped with a gate valve to be closed before parking, in order to prevent water in the pump from flowing back to the intake pipe or even the sealed container under the pressure of the exhaust pipe. Install a vacuum gauge between the intake gate valve and the pump intake to check if the pump is functioning properly at any time. A gate valve should also be installed on the water supply pipeline of the 2SK water ring vacuum pump to adjust the water supply to meet the specified requirements.
3. Installation of gas water separator for 2SK water ring vacuum pump:
The 2SK water ring vacuum pump air-water separator is placed on the foundation according to Figure 8. If it is necessary to change the installation position, attention should be paid to the connection pipeline of the separator, which should not be too long, and the transformation should not be too rapid (the distance between the connection pipeline and the pump inlet should not exceed half a meter in height, 2 meters in length, and no more than three transformations, otherwise the flow loss of water and gas in the pipeline will increase, thus increasing the pressure at the pump exhaust end, reducing flow rate and vacuum degree, and increasing power consumption.
