Brand: Justia Imported: No Packaging: Drum Adhesive Material Type: Fiberglass, Stone, Metal, Wood, Ceramic, Leather, Glass, Electronic Components, Rubber, Plastic, Cement Products Active Substance: 8 Shear Strength: 25 Dimensions: 2 Shelf Life: 24 months Standard: GB Selling Area: National Item Number: 20180702
Name:PrimerAdhesive aidModel: GY-918Brand:Jing NieTrademark ProtectionFeatures: Accelerates initial tape adhesion speed, enhances adhesive strength Bonding Surfaces: ABS, PET/PBT, blends, concrete, woodglass, etc.Usage Instructions:
The bonding surface must be cleaned with a 50% acetone solution, and after the surface is dry, apply the primer/adhesive evenly to the bonding area with a brush (without fiber shedding). The coating thickness should be 0.05MM. For EPDM seals, apply the primer twice back and forth to break the surface release agent. The tape can be attached only after the primer is dry.
GY-918 primer is a light brown transparent liquid. It is a glue used to coat the surface of the adherend before bonding to enhance adhesive properties. When it reacts with water molecules in the air, it produces high bonding strength and has high-temperature resistance. Particularly when used with 3M acrylic foam tape, it achieves excellent bonding results.
Application Guide (How to Use Adhesive Aid?)
1. Bonding Surface Preparation ·Wipe the bonding surface clean with a cloth dampened in 50% isopropyl alcohol, acetone, or toluene, ensuring no fibers are left behind.
2. Operation · Shake the bottle containing the primer vigorously before use. · Apply the primer evenly to the bonding surface using a brush or roller (free of fiber shedding), with a general coating thickness of 2~4u.
3. Drying Time - The drying time generally varies depending on temperature, humidity, and coating thickness. - Normal drying time: 3 minutes to half an hour - Good drying time: 5 to 10 minutes (Temperature: 23°C, Humidity: 65%) - Pay attention to keep the coating surface uncontaminated during this process.
4. Apply double-sided tape by pressing it onto the dried coating surface.
Cautionary Notes:
·1. Primer is a highly reactive chemical substance, so only the amount needed for the day (8 hours) should be taken out each time, with the remainder kept sealed for storage.
·2. The operating environment should have good ventilation and be kept clean.·3. Operation environment must be smoke-free; this product is flammable and should be kept away from fire sources.
Note: This product utilizes the same 3M technology.94 primer substitute is not OEM.
Cautionary Notes:
1. Please conduct a small-scale test to check for any chemical reactions between this product and the material to be coated. However, rest assured that it does not react chemically with surfaces like car paint, plastic, glass, or metal.
2. This product is a volatile GY-918 base adhesive. Therefore, always ensure proper sealing when in use. Immediately tighten the cap after removing the brush. After use, make sure to screw the lid tightly!!
3、This product has an initial stickiness but should not be used as glue alone; it must be paired with tape to enhance the bonding power of the tape.
4. This product is not a cleaning liquid; do not use it incorrectly. Not suitable for children! Avoid contact with eyes and skin. In case of accidental contact, rinse with water immediately.
5、Ensure the surface is completely dry after applying the undercoat before sticking tape; otherwise, it may not adhere properly. Remember! Remember!!
