Clean Sampling Vehicle Product Overview:

The product is suitable for sampling of raw and auxiliary materials used in pharmaceutical preparations and aseptic preparations. It is widely applicable for sampling of raw materials in special occasions in industries such as medicine, preparation, electronics, precision instruments, meters, and food. According toGMPStandard requirements: The sampling vehicles produced in our factory reach a cleanliness level of 10,000, and the electric components used are in compliance withGB1497-85(Electric Safety Standards); CompliantGB-191( Packaging Standards ) specifications. The clean sampling vehicle's electrical control panel features computer touchpoint control, the fan has variable speed regulation, and the airflow can be adjusted as desired. The clean sampling vehicle is equipped with an ultraviolet sterilization lamp. Other specifications and dimensions can be custom-made according to customer requirements or soft curtains can be added at both ends.

Clean Sampling Vehicle Description:

(1)A Clean Sampling Vehicle is a vertical airflow local air purification unit that achieves a high-purity working environment by passing the indoor air through pre-effect filtration and then through a high-efficiency air filter, expelling it as clean air.
This clean sampling vehicle is designed based onGMPStandard requirements for design and manufacturing, cleanliness up to 100-class.-Million-grade requirement, suitable for use in cleanroom environments, commonly used in pharmaceutical preparations.(Excluding sterile preparations.)Sampling of raw materials. The centrifugal fan and other main components used in this sampling vehicle comply withGB1497-87(Motor Safety Standards)Requirements: The product structure is composed of stainless steel plates or powder-coated steel plates.

(II)Usage Instructions: Move the clean sampling vehicle to the location where sampling is needed, secure the sampling vehicle (apply the brakes); connect the power supply, turn on the power switch, and turn on the fan switch.,The fan starts up, adjusting the voltage to an appropriate level (usually)220V)，Pending operation of the clean sampling vehicle15Minutes later, place the sampling bucket inside; upon completion of sampling, remove the bucket, turn off the fan and power, unplug the power cord, and return the sampling vehicle to its original position.

Note: Regularly measure the working area's wind speed with an anemometer based on usage. If it's found to be non-compliant with technical requirements, adjust the fan air volume and, if necessary, replace the high-efficiency or pre-efficiency air filters.

Product Variety:Clean sampling vehicle,Clean Sampling Vehicle,Sampling Vehicle,Sample Vehicle,Purification Sampling Vehicle,Cleaned Sampling Vehicle,Mobile Purification Sampling Vehicle,Portable Purification Sampling Vehicle

Style Description:

StyleAOverall steel plate orSUS304Stainless steel construction, glass on both sides, hollow underneath without a countertop.

StyleBOverall steel plate orSUS304Stainless steel construction with glass on both sides and a load-bearing platform below.

StyleCOverall steel plate orSUS304Stainless steel construction, with side panels and a lower support platform.

StyleDOverall steel plate orSUS304Stainless steel construction, three-sided wall panels, equipped with a downflow air shower system.

1.Top-mounted with an integrated UV sterilization lamp and lighting fixture,High-Efficiency Sterilization,Create a clean and sterile work environment for you.

2.Adopted3Adjustable air volume control system with soft-touch switches to ensure the air speed is always ideal.

3.Stainless steel perforated diffuser grille, for more even air flow within the area.

4.Thickened glass observation surface, less prone to shatter than standard glass, and does not cause accidental injury to the human body.

5.Eco-friendly antimicrobial glass partition curtains.

6.TopG4Initial efficiency air inlet filter.

7.Eco-friendly Antibacterial Glass Soft Curtain Partition

8.Sampling Truck Load Platform