Fluid Flow Control Gate, Swing Gate, Flip Gate, Steel Gate, Stainless Steel Regulating Gate, Hydraulic Gate, Stormwater-Sewage Separation Gate, Wastewater Diversion Gate, Stormwater-Sewage Separation Gate, Hydraulic Flow Control Gate

Product Features:
1. Utilizes intelligent integrated control
2. Easy Installation: Wall-mounted installation, DN200-1500
3. Well equipment requires no maintenance
4. Smaller installation space required: Can be installed vertically or horizontally
5. Aesthetically pleasing: Unlike traditional opening and closing mechanisms, it does not protrude from the ground.
6. Measures are well-designed, easy to maintain, user-friendly, and have a long service life, with the flexibility to choose any drive unit.
7. Multiple Control Modes: Manual, Automatic, Remote, Emergency Operation
8. Upgradable gate seal face, capable of scraping off adherent materials from the seal face, and automatically clearing debris
9. The gate body is sturdy and durable; the reinforced rib design of the valve body enhances its strength. The design of the direct current channel prevents debris and blockages, offering a wider range of adaptability.
10. Valve bodies and frames are made of SUS304 material
Hydraulic flow control gate assembly:
The hydraulic flow control valve consists of a throttle gate, hydraulic cylinder, and hydraulic opening and closing system. It features a simple structure, easy maintenance, light weight, and can be used in any direction, with the added benefit of remote operation. The hydraulic operation is achieved by providing pressure to the cylinder from an external pump station, where the cylinder is connected to the gate to facilitate its opening and closing.

The hydraulic flow control gate consists of the gate frame, movable gate, guide rail, sealing ring, hydraulic cylinder, and control system. The hydraulic flow control gate, based on the water level from the level gauge, sends signals to the RTU. These signals allow for the calculation of the gate's correct position, which is then controlled by an actuator to open the gate. The hydraulic flow control gate can be divided into flat gate and flip gate, also known as the hydraulic rotating weir gate. It is commonly used in intercepting and collecting engineering, installed at wastewater outlets or rainwater outlets, serving the functions of waste water interception, separation of stormwater and wastewater.

Hydraulic Flow Control Gate, Swing Gate, Flip Gate, Steel Gate, Stainless Steel Regulating Gate, Hydraulic Gate, Stormwater and Sewage Diversion Gate, Wastewater Diversion Gate, Hydraulic Flow Control Gate

Maintenance of hydraulic flow control gates and other metal structures:
1. Gate Cleaning: Clean the gate and gate channel of mud, dirt, adhered aquatic organisms, and other debris to maintain cleanliness and the integrity of the coating.
2. Gate Adjustment: When the gate is off-center, it should be adjusted in coordination with the opening and closing machine to correct the misalignment; the side wheels should maintain consistent spacing with both sides of the gate groove.
3. Maintenance of gate walking supports and guiding devices: lubricants should be regularly applied to the gate roller, lifting lugs, pivot pins, and other parts.
4. Maintenance of gate water stop device: Should fit tightly against the water stop plate.
5. Door Channel Maintenance: Ensure a secure connection with the substrate and a smooth surface. Regularly clean debris and flush with water.

Hydraulic flow control gates can be installed upstream or downstream. As an integrated system, the hydraulic flow control gates can be mounted at any point on the pipeline or channel, offering a wide range of applications and economic efficiency. These gates are activated and closed based on data detected from the configured level gauge and rainfall sensors. Once the overall equipment is installed, we set the level and rainfall values; when the level or rainfall reaches these values, the gate automatically opens; when the level or rainfall falls below the set values, the gate closes. The hydraulic flow control gate consists of the gate frame, movable gate, guide rail, seal, hydraulic cylinder, and control system. The level gauge transmits signals to the RTU, which can calculate the gate's correct position through these signals, and the gate is controlled to open by the actuator.
Our company adheres to the business philosophy of "诚信为本, 质量为魂, 服务促发展," and we persist in "sincere pursuit of reality, serving the society, and prioritizing reputation—customer satisfaction is our pursuit."