Foshan Baihong Waterproofing and Leak Repair Engineering Co., Ltd. shares kitchen waterproofing and leak repair knowledge. Due to the numerous drainage pipes in the kitchen and complex waterproofing terrain, there's a high chance of visible water and minimal base deformation. Therefore, we recommend combining the general-purpose K11 waterproofing paint with flexible type for kitchen waterproofing.
1. Clean and moisten the base (no standing water). 2. Apply the base with a brush or roller, at least twice, with each coat's direction alternating. 3. After the K11 general waterproofing layer dries, apply two to three coats of K11 flexible waterproofing paste at all wall corners and pipe edges. The overlap width should be less than 10cm. 4. Other coverings can only be applied once the waterproofing layer is fully cured. 5. The floor coating thickness is 1.0 to 1.2mm, and the wall coating is 0.8 to 1.0mm. The height of the wall coating depends on the design or general contractor's requirements. For any kitchen waterproofing and leak repair services needed, please contact our company promptly by phone!





























