Stainless Steel (AISI 304)
There are many types of stainless steel balls.AISI 304, AISI 316, AISI 316L, AISI 420, AISI 420C, AISI 440, AISI 440C. AISI 304 steel balls have low hardness but excellent corrosion resistance, suitable for applications such as corrosion, dye, food processing, valves, and sexual products.
Our factory'sAISI 304 Stainless Steel Balls
Minimum Diameter:2mm
Accuracy:G100
Hardness:HRc25-39
Stainless Steel (AISI 316L)
The carbon content of AISI 316L stainless steel balls is lower than that of AISI 316 material.
Enhanced corrosion resistance, with excellent resistance to sulfuric compounds.
Commonly used for valves and jewelry applications.
Our factory'sAISI 316L Stainless Steel Balls
Minimum Diameter:2mm
Accuracy:G100
Hardness:HRc25-39
Stainless Steel (AISI 420)
AISI 420 features good hardness, excellent corrosion resistance, and strength, commonly used in all applications requiring corrosion resistance.
Bearings, valves, writing instruments, food environment, freshwater, numerous petroleum products, corrosion-resistant
Products and weakly acidic environments.AISI 420 is also magnetic.
Our factory'sAISI 420 Stainless Steel Balls
Minimum Diameter:1.2mm
Accuracy:G10
Hardness:HRc52
Stainless Steel (AISI 420C)
AISI stainless steel balls offer the advantages of maximum hardness and corrosion resistance.
FeaturesThe hardness range of the 420C balls is slightly higher than that of the 420. Their excellent surface finish also makes them
Especially suitable for bearings, valves, and other applications in harsh environments.
Our factory'sAISI 420C stainless steel ball:
Minimum Diameter:1.2mm
Accuracy:G10
Hardness:HRc52
Stainless Steel (AISI 440)
AISI 440 type stainless steel ball bearings are widely used in applications requiring hardness and dimensional stability.
Corrosion resistance and toughness.440 ball can withstand corrosion from fresh water, steam, crude oil, gasoline, and sweat.
Alcohol, blood, and food. Only when...440 balls must be fully hardened to achieve maximum corrosion and rust resistance.
Polished to a high-gloss finish.440 balls are also magnetic.
Our factory'sAISI 440 Stainless Steel Balls
Minimum Diameter:1.2mm
Accuracy:G10
Hardness:HRc60-67
Stainless steel (AISI 440C)
AISI 440C steel balls offer the highest strength and excellent corrosion resistance in stainless steel materials, and they also possess good hardness.
So440C steel balls are commonly used in bearings, valves, and more.
Our factory'sAISI 440C Stainless Steel Balls
Minimum Diameter:1.2mm
Accuracy:G10
Hardness:HRc60-67
Offshore Price: Negotiable
Supply Capacity:160ton/Month/ton
Minimum Order Quantity:20kg
Port: Shanghai
Payment Methods:L/C 、D/A 、D/P 、T/T、Western Union、Paypal
Dimensions:6.747mm 17/64''
Material:Gcr15
Hardness:HRC60-66
Accuracy Grade:G10
Material Characteristics: Low-alloy martensitic chrome steel, due to its high hardness, wear resistance, high surface finish, and high dimensional accuracy, is widely used in the manufacturing of mechanical components.
Applications: Precision Bearings, Auto Parts (brakes, steering, drive shaft), Bicycles, Mixers, Electrical Appliances, Sliders, Quick Connectors, Machining Machines, Locks
Mechanical devices, conveyor belts, roller skates, pens, pumps, casters, measuring instruments, valves
Customer:√ Supplier √ Manufacturer √ Company √ Factory √ Distributor √ Agent √ End User
Marketing Regions: Asia, North America, Europe, South America
Product | 6.474mm 17/64'' G10 Chrome steel ball |
Materials | AISI52100/Gcr15/100Cr6/SUJ-2 |
Grade | G10 |
Surface | Zero defects, clean |
Inspection | 99.9% Inspection |
Sample | Free Samples |
Safety | ROHS |
Sales Model | Wholesale or retail |
Certification | ISO 9100; IATF16949 |
Packaging | Four small boxes in one cardboard box |
Chrome steel ball AISI52100 | ||||||||
Material Standards | Chemical Composition （％） | Hardness | ||||||
C | Cr | Ni | Si | Mn | P | S | ||
AISI52100 | 0.95-1.1 | 1.3-1.6 | / | ≤0.35 | 0.2-0.5 | ≤0.025 | ≤0.025 | HRC60-66 |
Dimensions:6.747mm PreciseGrade: G10 | ||||||||
Product | |
Material | Stainless Steel 420 And 420C |
Grade | G10-G1000 |
Surface | Zero defects, clean |
Dimensions | 1.5-25.4mm |
Samples | Free Samples |
Application | Special bearings, anti-friction bearings, special pumps, ball races, lighters, pens, car seat belts and components. |
Features | Martensitic hardened stainless steel balls, featuring excellent hardness, corrosion resistance, wear resistance, and durability.The ball is provided in a passivated state. |
Corrosion resistance | Excellent corrosion resistance in industrial atmospheres, freshwater, steam, alcohol, ammonia, several oil field products, organic compounds, dairy products, and weak acid environments.It appears light yellow in food and alkaline solutions. Fair salt atmosphere. It resists contact with seawater and strong acids (even diluted). |
Certification | ISO 9100;2008SGS |
Packaging | Boxes, cardboard boxes, wooden pallets |
Material
AISI 420 & 420C Stainless Steel | |||||||||
Material Standards | Chemical Composition （％） | Hardness (measured on parallel planes) HRC） | |||||||
C | SI | Mn | P | S | Ni | Cr | Mo | ||
AISI 420 | ≤0.26-0.35 | ≤1.00 | ≤1.00 | ≤0.035 | ≤0.03 | ≤0.06 | 12-14 | ≤0.75 | HRC48-50 |
AISI 420C | ≤0.36-0.45 | ≤0.60 | ≤0.80 | ≤0.035 | ≤0.03 | ≤0.06 | 12-14 | - | HRC52-55 |
Dimensions:1.5-25.4mm Precision Grade: G10-G1000 | |||||||||
Product | |
Material | Stainless Steel 440 And 440C |
Grade | G10-G1000 |
Surface | Zero defects, clean |
Dimensions | 2.381-25.4mm |
Samples | Free Samples |
Applied | Precision Bearings, Friction Reducing Bearings, Special Valves, Conveyor Belts and Drums, Ballpoint Pens.They are used in food, quick connectors, circulating ball bearings, knotting devices, and refining equipment. |
Features | Martensitic hardened stainless steel balls, featuring high hardness, excellent wear resistance, smooth surface finish, and narrow dimensional tolerances.For this reason, the steel is often used in precision equipment. The balls are provided in a passivated state. |
Corrosion resistance | This material exhibits corrosion resistance when in contact with freshwater, steam, oil, gasoline, and alcohol.They are susceptible to pitting corrosion in marine environments. They have poor resistance to acidity in acidic conditions. |
Certification | ISO 9100;2008SGS |
Packaging | Boxes, cardboard boxes, wooden pallets |
Materials
AISI 440 & 440C Stainless Steel | |||||||||
Material Standards | Chemical Composition （％） | Hardness (measured on parallel planes) HRC） | |||||||
C | SI | Mn | P | S | Ni | Cr | Mo | ||
AISI 440 | ≤0.9-1 | ≤0.80 | ≤0.80 | ≤0.035 | ≤0.03 | ≤0.06 | 17-19 | - | HRC56-58 |
AISI 440C | ≤0.95-1.1 | ≤0.80 | ≤0.80 | ≤0.035 | ≤0.03 | ≤0.06 | 16-18 | 0.4-0.7 | HRC58-60 |
Dimensions:2.381-25.4mm Precision Grade: G10-G1000 |
Quality Assurance
Prior to packaging, steel balls undergo final inspection. In accordance with the specified control plan and dock inspection procedures, surface roughness, roundness, waviness, batch dimensions, and hardness are checked in a precise laboratory.Upon meeting all requirements, a test certificate will be prepared for the customer. Our precision laboratory is equipped with high-precision, globally renowned machinery and equipment, managed by qualified personnel who have received proper training.
Product | |
Material | Stainless Steel201 |
Grade | G100-G1000 |
Surface | Zero defects, clean |
Dimensions | 2.381-12.7mm |
Sample | Free Samples |
Applicable | Special bearings, auto parts, switches, die casting equipment.They are widely used in the electronics industry. |
Features | Cr-Mn Stainless steel ball bearings, with performance similar to AISI 304 Ball bearings (slightly higher mechanical properties). The ball is provided in a passivated state. |
Corrosion resistance | Excellent corrosion resistance, oxidizing solutions for organic substances, sterilizing solutions.Excellent resistance to atmospheric corrosion and dye. Pitting and crevice corrosion may occur in the presence of hot chloride solutions, when the temperature exceeds...60°C Stress corrosion may occur. They are not resistant to sulfuric acid solutions. |
Certification | ISO 9100;2008SGS |
Packaging | Boxes, cardboard boxes, wooden pallets |
AISI 201 Stainless Steel | |||||||||
Material Standards | Chemical Composition （％） | Hardness (measured on parallel planes) HRC） | |||||||
C | SI | Mn | P | S | Ni | Cr | Mo | ||
AISI 201 | 0.15 | ≤1.00 | ≤5.5-7.5 | ≤0.06 | ≤0.03 | 3.05-5.5 | 16-18 | - | HRC≤26 |
Dimensions:2.381-12.7mm Precision Grade: G100-G1000 | |||||||||
Product | |
Materials | Stainless Steel 304 |
Grade | G100-G1000 |
Surface | Zero defects, clean |
Dimensions | 2.381-12.7mm |
Sample | Free Samples |
Application | Special bearings and pumps, mist pumps, gardening and household sprayers, perfume micro-pumps, seals, application valves, agricultural backpack sprayers.They are used in the food, aerospace, and military industries. |
Features | Unhardened Austenitic stainless steel balls, showcasing excellent mechanical properties, toughness, and corrosion resistance. AISI 304L Offer lower carbon content.AISI 302Enhanced mechanical properties. The ball is provided in a passivated state. |
Corrosion resistance | Excellent corrosion resistance, oxidizing solutions for organic substances, sterilizing solutions.Good resistance to atmospheric corrosion and dye. They are prone to pitting and crevice corrosion in the presence of hot chloride solutions; when the temperature exceeds...60°C Stress corrosion may occur. They are not resistant to sulfuric acid solution. |
Certification | ISO 9100;2008SGS |
Packaging | Boxes, cardboard boxes, wooden pallets |
Materials
AISI 304 & 304L Stainless Steel | |||||||||
Material Standards | Chemical Composition （％） | Hardness (measured on parallel planes) HRC） | |||||||
C | SI | Mn | P | S | Ni | Cr | Mo | ||
AISI 304L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 8-10.5 | 16-18 | - | HRC≤26 |
AISI 304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 8-10 | 17-19 | - | |
Dimensions:2.381-12.7mm Precision Grade: G100-G1000 | |||||||||
Product | |
Material | Stainless Steel 316 |
Grade | G100-G1000 |
Surface | Zero defects, clean |
Dimensions | 2.381-12.7mm |
Samples | Free Samples |
Application | Photographic equipment, quick connectors, ball joints, ink cartridges, jewelry, special bearings, pumps and valves, aerosol and spray distributors.Food, Papermaking, Chemical, Rubber, Military, Textile Industries |
Features | Austenitic stainless steel steel balls have superior corrosion resistance to AISI 304 Steel ball. They demonstrate excellent resilience. AISI 316L Low carbon content (highest) 0,030%）。 The ball is provided in a passivated state. |
Corrosion resistance | Excellent corrosion resistance, with good resistance to organic substances (acetic acid, phosphoric acid, sulfuric acid).They experience pitting and crevice corrosion in the presence of hot chloride solutions, when the temperature exceeds...60°C Stress corrosion may occur. They resist contact with hydrochloric acid and hydrofluoric acid, aqua regia, iron, and magnesium chloride. |
Certification | ISO 9100;2008SGS |
Packaging | Boxes, cardboard boxes, wooden pallets |
Materials
AISI 316 & 316L Stainless Steel | |||||||||
Material Standards | Chemical Composition （％） | Hardness (measured on parallel planes) HRC） | |||||||
C | SI | Mn | P | S | Ni | Cr | Mo | ||
AISI 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 12-15 | 16-18 | 2.0-3.0 | HRC≤26 |
AISI 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 10-14 | 16-18 | 2.0-3.0 | |
Dimensions:2.381-12.7mm Precision Grade: G100-G1000 | |||||||||
