Six oil and two fabric anti-corrosion steel pipes
The anticorrosive steel pipes, composed of six oils and two fabrics, are made up of a two-component coating consisting of part A (epoxy) and part B (curing agent). They offer excellent adhesion, toughness, resistance to moisture, water, and chemical media. They possess the ability to prevent various ions from penetrating through the paint film and exhibit the property of expanding and contracting at the same rate as the coated object. The paint film never peels off or cracks. Thickness ranges from 0.5 to 1.0 mm. Epoxy coal tar is a cost-effective form of anticorrosion, and engineering tests show that when combined with cathodic protection, it results in minimal corrosion over twenty years of use for oil and gas pipelines.
Six Oil and Two Fabric Corrosion-Resistant Steel Pipe Manufacturer refers to the common term "X fabrics and Y oils," with common configurations including one fabric and two oils, three oils and two fabrics, three fabrics and four oils, three fabrics and five oils, six oils and two fabrics, and four fabrics and six oils. The epoxy coal tar enamel anti-corrosion spiral steel pipe consists of epoxy coal tar enamel primer and topcoat, both of which are primarily made of epoxy resin and coal tar as the film-forming materials, with the addition of various rust-proof pigments, insulating fillers, toughening agents, leveling agents, diluents, and anti-settling agents, etc. Appearance: the primer A component is iron red, the primer B component is black, and the topcoat is all black.
Six-oil and two-cloth anti-corrosion steel pipe factory's external anti-corrosion coating. In December of the same year, experts from the China Petroleum Construction Bureau, Pipeline Bureau, Sichuan Petroleum Design Institute, and the Northwest Pipeline Command Group jointly formed a team to investigate 3PE coating lines in the United States, Italy, and Turkey. In May 1995, the Liaohe Oil Construction Company was responsible for bidding and introduced the first 3PE coating line from the Canada-based Genlow Company. In early 1996, it was put into normal production. In May 1996, the Shuozhou Anti-corrosion Factory jointly built by the Italian company Soksom and Harbin Plastic No. 6 Factory started normal production. The 3PE coating line jointly invested in by the Northwest Pipeline Command Group and a Hong Kong merchant, imported from the Netherlands, was completed and put into production at Baoji Yidong Anti-corrosion Company in 1996. From this point on, 3PE anti-corrosion gained attention and application in China. Starting with the涩宁兰 pipeline construction, through bidding and the full domestic production of 3PE anti-corrosion materials.
Epoxy coal tar anticorrosive spiral welded pipe, also known as the drinking water IPN8710 anticorrosive steel pipe, is a new type of composite material made by melting and spraying or adsorbing food-grade epoxy powder coating or PE material on the inner wall of steel pipes through special processes, and then curing at high temperatures. Technical parameters of PP-S coated steel pipes: coating material: PE (modified polyethylene) or EP (epoxy resin), common colors: black, gray, blue, red, coating thickness: PE (modified polyethylene) coating thickness, EP (epoxy resin) spraying thickness, coating method: PE (modified polyethylene) is hot dip galvanized, EP (epoxy resin) is both internal and external spraying, product specifications: ambient temperature: -30℃ to 120℃, measurements required for connection, length, and wall thickness. Next, cut the steel pipe to the required length specifications, and sand the pipe ends to remove burrs.
