Radar is a radio device that uses radio waves to determine the location of objects. To avoid interference from surrounding buildings, radar towers are typically as tall as 100 meters.
Approximately m, due to the performance requirements of the radar, the fundamental frequency of the radar tower must not be less than 1.0 Hz. Through extensive calculations and analysis, some significant improvements have been identified.
The regularity of the basic frequency of high radar towers. Radar towers are widely used in modern applications, whether at sea or on land, in traffic, and for navigation.
Position, speed measurement, search, etc. Additionally, the seismic response of the radar tower was analyzed using the response spectrum method, time history analysis, and random vibration method. Calculations
The results indicate that the radar tower meets the seismic code requirements for inter-story displacement.
Steel Tower Structure:
The entire tower is primarily composed of three major parts: the tower head, the tower body, and the tower legs. For guyed towers, the guyed section is also added. The tower head extends upwards from the tower legs to the tower frame section.
Sharp changes (represented by lines) above the mentioned section are the tower head. If there is no sharp change in cross-section, the part above the lower horizontal brace is considered the tower head. Tower leg
The base section above is called the tower leg, the tower body, and the part between the tower leg and tower frame is referred to as the tower body.
Technical Specifications:
1. Basic Wind Pressure: w0 = 0.4 - 0.8 KN/m²
2. Seismic fortification intensity: 8 degrees and below
3. Foundation bearing capacity: 100 and 200 KN/m²
4. Ice Thickness: ≤10mm
5. Verticality: ≤1/1000
6. Corrosion Treatment: Hot-Dip Galvanized
Technical Specifications:
1. Code for Design of Lightning Protection for Buildings (GB50057-94)
2. Tall Structure Design Code (GBJ135-90)
3. Steel Structure Design Code (GB50017-2003)
4. Tower Mast Steel Structure Construction and Acceptance Specification (CECS 80:2006)
