Stainless Steel Modular Lined Water Tank

This process is suitable for the renovation of ordinary steel plate water tanks and concrete water tanks. It involves lining the inner walls of the tank with 1.2mm thick stainless steel sheets using argon arc welding for integral molding. The stainless steel sheets are secured to the tank walls with expansion bolts, ensuring the lining is firmly attached to the original tank walls.

Rust Resistance: Imported food-grade stainless steel sheets offer excellent corrosion resistance and are not prone to rust.

2. Leak Prevention: Other water tanks do not have an intermediate rubber pad; on-site argon arc welding is used.

3. Aesthetically Pleasing and Sanitary: The entire system is enclosed. The surface of the stainless steel panels is smooth, preventing the growth of moss and algae. Sediments in the water tank are also easy to clean and flush.

4. Wide Application: Widely used in the manufacturing of liquid storage containers for industries such as hotels, apartments, high-rise buildings, cold and hot water tanks, food, environmental protection, and chemical engineering.

Construction of stainless steel assembled inner tank衬

Stainless steel assembled inner tank, also known as pool inner tank and concrete stainless steel inner tank.

Features of stainless steel assembled inner-lining water tanks: This process is suitable for the transformation of ordinary steel plate water tanks and concrete pools. A layer of 1.2mm thick stainless steel plate is embedded on the inner walls of the water tanks and reservoirs. The technique uses argon arc welding for integral molding, securing the stainless steel plate to the pool wall with expansion bolts, ensuring a firm bond between the lining and the pool wall. Preparations before construction: Before the concrete water tank is shaped, pipe fittings for inlets and outlets (including drainage outlets, inlet, outlet, overflow, etc.) should be pre-buried. After the concrete water tank is shaped, the inner wall should be smooth and flat to allow for seamless joining of the stainless steel plate with the concrete inner wall, and a waterproofing layer should be applied.

Stainless Steel Assembled Lining Water Tank Lamination

1. Carefully study the technical specifications of the drawings and confirm the actual dimensions of the concrete water tank on-site.

2. Inspect the positioning and layout after checking according to the drawings.

3. Measure, locate, drill, and embed stainless steel expansion bolts at the connection points between the inner shell and concrete walls.

4. Carefully inspect the layout and material cutting according to the drawings, welding the bottom, side, and top panels in sequence. Add a 3 cm lining on both sides at the panel joints for full welding to ensure the overall strength of the water tank.

5. Align with the drawings and the embedded position of the expansion bolts, stamp the assembled panel. Smooth the edges of the holes, attach the right side to the concrete wall, check and install the stainless steel expansion bolts. Position the expansion bolts facing the interior of the tank and weld them to the sealed cover plate.

Jiangsu Mengyuan Water Supply and Drainage Technology Co., Ltd. specializes in: stainless steel assembled inner-lining water tanks manufacturer, stainless steel assembled inner-lining water tanks price, stainless steel assembled inner-lining water tanks quotation, stainless steel assembled inner-lining water tanks sales, stainless steel assembled inner-lining water tanks wholesale, and stainless steel assembled inner-lining water tanks.