The installation height of the bedside equipment of the central oxygen supply system can be designed and installed according to specific circumstances, taking into account factors such as the height of the bed head and whether the wall is tiled. Generally, it is installed at a height of 1300-1500mm; Generally, newly built or renovated hospitals will embed pipelines into the walls and install medical equipment belts after the walls are coated with putty; Ordinary concrete or brick walls can be fixed with equipment straps using expansion bolts or steel nails; Wall foam light brick is generally fixed with several expansion bolts with high density, and the back-to-back room can also be fixed through the opposite, which will be more secure; The single-sided wall made of light steel keel gypsum board can be fixed with self tapping wire keel or aircraft expansion bolts, and back-to-back can also be fixed with through method. The width of the bedside equipment belt is generally 200-270mm. Regardless of the size of the equipment belt used, the lower edge of the installation height of the medical equipment belt should be around 1300mm.

The bedside equipment belt of the central oxygen supply system, also known as the medical equipment belt, is mainly used in hospital wards to load gas terminals, power switches, sockets and other equipment. It is an essential gas terminal control device for the central oxygen supply and central suction system. The bedside equipment belt is made of aluminum alloy material with spray coating surface treatment, which has a beautiful appearance, wear resistance, and easy cleaning; There are two types of structures: single chamber and double chamber, with a transparent cover at the gas terminal; Circuit air separation type dual channel, safe; Easy to install and maintain, colors can be customized according to user requirements.