Parameters of Magnetic Resonance Non Magnetic Monitoring System
Introduction to HYSX-05-01 Magnetoless Monitoring System Parameters
Main technical parameters:
Electromagnetic compatibility:EMC anti-interference meets the EN50130-4 standard, EMC radiation meets the requirements of Class B equipment in EN505022, and meets the requirements of Part 15 of Class B in FCC.
Rated voltage12VDC；
Voltage range:10.8～39V DC；
System format:PAL；
Power consumption: approximately4W；
Image Sensor: Interlayer TransferCCD， 1/3 inch image format;
Effective picture pixels:PAL type 752 horizontal x 582 vertical, NTSC type 768 horizontal x 494 vertical;
Horizontal clarity:540 TV cable;
Signal to Noise Ratio:50dB；
Gain:21dB (* large);
Electronic Shutter: Automatic,1/50 to 1/125000 seconds (CCIR), 1/60 to 1/150000 seconds (EIA);
Correction of ritual path distortion: horizontal and vertical, symmetrical;
Bai Nianheng; Automatic sensing（2500-9000k)；
Video output:1.0Vpp， 75 ohm composite video;
Synchronous line locking (when only AC power is used): The camera is synchronized with the power supply line at zero crossing to achieve;
Workers without real estate need to switch to higher positions. Can adjust the vertical phase delay（0-358 degrees) to achieve vertical synchronization when using a multi-phase power supply;
Synchronize free running(When turning off DC power or LL): Internal crystal reference;
Connector video output:BNC；
video/DC optical circular connector: 4-pin gauge EIA-J;
Environmental Requirements:
Operating temperature:-20℃～50℃（-4℉～122℉）
Storage temperature:-25℃～70℃（-13℉～158℉）
Operating humidity:5% to 93% non condensing.
