180 degree flipping machineThe turntable does not rotate:

1. The frequency converter is burnt out and there is no display for replacement;

2. Set the parameters of the frequency converter incorrectly and reset them according to the requirements;

3. The turntable chain is broken. Adjust the distance between the size chain wheels and connect the chains. If the chains are damaged, replace them;

4. Use a detection table or a shaking table to check for defects or breakdowns in the turntable motor itself. If it cannot be repaired on site, replace the motor;

5. The turntable reducer itself is malfunctioning;

6. Knob damaged, chassis not turning (E-type equipment);

7. PLC does not have an output body;

8. The connection between the turntable reducer and the sprocket is abnormal. Replace the connecting flat key.