Cold press specifications

1. Select a surface clean and flat density board as the processing substrate, and clean the surface of the workpiece thoroughly

2. Before applying glue, the thickness of the flattened surface must be strictly controlled. Any non-conforming parts must be discarded and dealt with separately,

3. Use a glue coating machine to apply glue evenly and uniformly. Wipe off any spilled glue and place the coated workpiece into the press according to the drawing requirements. The workpiece should be placed flat and fixed at the opposite end. The aggregate should be placed according to the empty space on the drawing, and the nail position should be staggered at the edge trimming.

Types of cold press machines

1. Purpose: To use the equipment safely, standardize the pressing process operation, and ensure that the product meets the quality requirements. 2. Scope of application: Cold press pressing door and pressing process. 3. Preparation of equipment, tools, and materials before operation. 3.1 Before operation, a comprehensive inspection of the oil circuit, circuit, and pressing plate of the cold press should be carried out, and an empty test run should be conducted to confirm that everything is in good condition before operation. 3.2 Check whether the machine pressure system is normal, whether the press oil pump and oil circuit are unobstructed, and whether there is any oil leakage. 3.3 Clean up the machine (including glue stains on the light plate) and the work site, and keep them clean at all times; 3.4 Prepare the substrate for processing

Customized cold press machine

5.1 Shutdown, cleaning, cleaning the site, and closing the pressure plate during the unloading process of cold pressing. Lift the workpiece and do not drag it down on the board to avoid scratching or damaging it. The two pressed workpieces should be placed flat on the cushion plate, and the workpieces with numbered decorative surfaces must be protected with paper or other protective measures. The workpiece must be placed strictly according to the pressure plate instructions, otherwise it may cause deformation of the pressure plate. Arrange according to the corresponding specifications on a flat surface, stack neatly, and after passing the inspection, make records and markings on the production record card and sign, and promptly transfer to the next process.