Instructions for Small Woodworking Planer
Introduction to single-sided planer: It adopts a piano key type pressing mechanism and is equipped with a safety protection cover, which has good safety and each piano key pressure can be independently adjusted. The body structure is strong and the planing stability is excellent.28 "* 21 1/4 large workbench with stable wooden support. After precise grinding and dynamic balancing calibration, the operation is extremely smooth. The anti rebound claw of the feeding end device effectively avoids the danger of workpiece rebound. The height of the workbench is adjusted by the handwheel. The workbench device has front and rear rollers. Improve the smoothness of workpiece feeding. Single sided planing technology parameters: motor power: 3KW, large processing width: 400mm, shaft speed: 5100mm, feed speed: 13/in, machine size: 770 * 820 * 1250
Explanation of Small Woodworking Planer
The blade shaft is the working device of the planer. The length of the blade shaft is equal to the width of the worktable, and the width of the planing workpiece depends on the length of the blade shaft, which is used as the basic parameter of the planing machine. The power for rotating the cutting tool shaft to cut the workpiece is supplied by an electric motor through a belt transmission device. A blade shaft is an assembly consisting of a planer body, a spindle, and a planer blade, which is installed into the blade and is called a planer shaft or blade shaft. Mainly composed of bed, saw wheel, upper saw wheel lifting and tilting device, saw blade tensioning device, saw blade guide device, worktable, guide plate, etc
Small woodworking planer type
Introduction to the small woodworking planer slide groove: The slide groove is matched with the slide rail, and the fixed seat (3) is fixed at the bottom of the base plate (1). The utility model has the advantages that: only large pieces of wood boards are placed on the sliding workbench, and gently and forcefully push them to form in one time, the processed Flat noodles can be directly used for panel assembly, without hanging ink lines and planing, and it saves labor, time and effort. Improve work efficiency by more than 10 times. At the same time, it can increase the functionality of existing small woodworking planers and adjust the required length, width, and angle freely
