Types of cable stripping machines

Instructions for Use:

1. Start the motor and check if it is running normally. When feeding, check the diameter of the rubber cables wrapped around each gear and feed them one by one.

2. In order to make the blade durable for a long time, the joint of the rubber cable should be cut off when feeding to prevent the blade from breaking due to a notch.

3. If there is excessive depth and wire breakage after the feed is discharged, pay attention to the following situations:

① Adjust the tightness of the M12 screws on both sides of the blade shaft on the feeding gear;

② Check if the position is placed incorrectly during feeding;

③ Check if the blade has been replaced and if the edge is too sharp. Use a specialized oilstone to slightly trim it until it is moderately adjusted.

Description of cable stripping machine

This machine is multifunctional, comprehensive, and has good performance. It adds five frame knives and three double wrapped tire socket holes on the basis of the KO machine, making the functions more subdivided and suitable for various types of wires, making it easier to strip various rubber cables. In addition, it can also strip single core or double core flat wires at once. Its stripping diameter range is (1-35mm), greatly enhancing the stripping function and making the function of each incoming hole more subdivided.

Cable stripping machine type

Name: 1st gear: Double channel three knife wire stripping machine (with 3 slots added in front)

2nd gear: Dual channel four knife wire stripping machine (with 4 slots added in front)

3rd gear: Dual channel five knife wire stripping machine (with 5 slots added in front)

Scope of application: 1st gear: Double channel three knife wire stripping machine with a diameter of 1.5mm to 46mm (11 feeding holes)

2nd gear: Double channel four knife wire stripping machine with a diameter of 1.5mm - to 46mm (9 feeding holes)

3rd gear: Double channel five knife wire stripping machine with a diameter of 1.5mm to 46mm (10 feeding holes)

Size: 68cm in length, 65cm in width, and 86cm in height

Weight: 80kg

Voltage and power: 220V/2.2KW, 220V/3KW, 380V/2.2KW

Daily production quantity: 200kGL-1000kg