Can scratches that occur during the use of Wulian Red Stone be repaired?

First, polish the scratch depth according to the needs.

Before repairing, it is necessary to determine the depth of the scratches on the Wulian red stone. If the scratches are very deep, a method of rough grinding to fine grinding should be used to treat them. If the scratches are shallow, 2000 # and 3000 # grinding discs can be used to remove them. Local deeper scratches can be removed by local grinding.

Secondly, fine scratches can be polished.

Small scratches on Wulianhong stone can be polished with Wulianhong polishing powder. For example, granite polishing powder can be used to polish stone or granite mainly composed of silicon dioxide, and glass polishing powder can be used to polish stone mainly composed of glass. The filling and polishing of polishing powder can significantly reduce scratches and increase surface brightness, thereby improving the repair effect.

The polishing steps are as follows:

First, clean the scratched surface, then pour an appropriate amount of water onto the surface, sprinkle polishing powder and mix evenly, and then use a wool polishing wheel to spin the surface of the stone from low to high until warm.

If possible, consider replacing the problematic bricks or re polishing to solve the scratches on the Wulian red stone.

Addendum: There are several methods for repairing scratches on Wulian red stone:

1. In order to prevent dust pollution and dirt infiltration, some small holes on the surface of the stone that are invisible to the naked eye can be sealed by waxing to extend their service life. At the same time, high-speed polishing machines can be used for polishing to achieve a smooth and bright effect.

2. The method for treating stone lesions caused by color spots such as oil stains, water stains, coffee stains, etc. infiltrating into the stone is to use imported agents to remove the stains and restore the natural color of Wulianhong stone.

3. Imported stone refurbishing machines are used for stones with deep scratches, unevenness, deep stains, and other pollution or diseases on the surface. Different grinding discs and discs are used to polish and polish the stones from coarse to fine, restoring their original appearance.

4. The surface of Wulian red stone will age after several years of use, which will have a serious impact on the aesthetics of the stone. This requires crystal hardening treatment of the stone. By grinding the abrasive, the calcium component in the stone reacts with chemical reagents to form a new layer of crystalline material on the surface of the stone. The reason for doing this is to enhance wear resistance, make the stone reflect its luster, and prevent stains from penetrating into the inner layer of the stone, achieving the desired hardness and brightness.