(1) Conducting underground television monitoring to obtain data such as borehole diameter and depth.
(2) Tools are made based on well conditions for well fishing and well cleaning operations.
(3) Utilize mud pumps and air compressors for drainage and gas lifting. Install a small drill bit at the lower end of the drill pipe, connect a high-pressure hose to the mud pump, and introduce high-pressure water flow into the drill pipe. Simultaneously, force air into the hole through the air compressor's duct, allowing sediment to be discharged from the wellhead into the mud pit.
(4) Sediment removal at the well bottom is achieved through backflushing with a plunger or spray, complemented by an air compressor for water extraction and well cleaning.
(5) Repair damaged well walls.
WaterAiTong's well cleaning method effectively clears sediment and silt blockages at the bottom of the well, removes fine particles from the aquifers surrounding the filter tubes, to unblock the groundwater intake channel, reduce water intake resistance, and achieve the desired water output.