详情描述
Shenzhen Electronic Car Scale Manufacturer, Installation and Precautions
Today, we introduce to you the electronic truck scale, a common weighing sensor device in our daily lives, used to measure the weight and volume of various trucks and large vehicle equipment. However, many people are still unaware of the precautions to take during the installation and operation of electronic truck scales. Here's a brief summary of eleven things to note during the installation and operation process. Let's learn together with the editor!
01. Users should securely ground the weighing body with a soft cable. Additionally, a lightning rod should be installed approximately 3 to 5 meters away from the weighing body, with at least 1 to 2 lightning rods. The height of the lightning rods should be 2.5 to 3 times the length of the scale to prevent unnecessary losses to the user!
02. The speed limit on the scale for vehicles is 5 km/h to prevent sudden braking of high-speed vehicles on the scale, which may cause shock and affect the service life of the sensors.
03. The system operates on a power supply of approximately 220V ± 10%, and if the voltage is unstable, it may affect the normal operation of the system, and an additional approximately 220V voltage stabilizer is required.
04. When not in use after work, please first turn off the power of all equipment, then disconnect the main power! Remove the power plug of the instrument.
Do not use during thunderstorms, and simultaneously, shut off the power to each device and the main power source. Remove the sensor's input plug to prevent lightning strikes!
06. Do not weigh vehicles exceeding the larger capacity scale.
07. Regularly clean the weighing body and periodically rotate the screws on the lid of the weighing body (to prevent corrosion and difficulty in removal).
08. Regularly inspect if the limit bolts can contact the protective edge.
09. Regularly maintain and inspect the grounding wire and lightning rod of the weighing body.
10. Regularly inspect the drainage channel next to the scale body to prevent water from seeping into the scale body and junction box.
11. The calibration head of the weighing indicator should be kept by a designated person, and the working parameters of the indicator computer must not be changed arbitrarily.
Believe it or not, many of you have already gained a good understanding of the installation and operation of electronic truck scales. However, the use of electronic truck scales goes beyond the aforementioned content. During the installation and use of weighing equipment, continuous inspection and regular checks by our inspectors are required. Although there are now unattended intelligent electronic truck scales, it is still necessary to strictly follow the usage instructions for weighing equipment. We hope this helps everyone.
Above is the introduction provided by the editor of the Shenzhen Electronic Truck Scale manufacturer about the installation and precautions for electronic truck scales. If you have any further questions, feel free to consult our website, where our technical staff will explain them to you.
询价单
