详情描述

One,Product Introduction

Remote ControlIgnition DeviceControl BoxPrimarily applied inPrimaryUsed for exploration and development in oil drilling operations with blowout preventionCombustible and hazardous gasesOr the combustion of exhaust gases.It is a safe environmental protection equipment designed to eliminate its environmental and safety hazards.

Remote Ignition DeviceControl BoxPrimarily composed of the control box, high-voltage connecting wires, and spark guns, among other components.Control box integrated24VDC battery, can be charged via an external 220VAC power supply. SettingsOneSolar panel arrays can also charge the battery, and the ignition equipment is primarily operated via the panel buttons.This product features a high-performance ignition circuit, ensuring stable performance and reliable operation.

Remote ignition device control boxBattery voltage real-time monitoring circuit has been specially designed; when the battery voltage is too low,The low-voltage indicator on the operation panel is lit and the buzzer is alarming.Remind users to charge promptly.

Two, Remote ControlIgnition Device Technical Specifications

1. Working Power Supply: DC24V

2. External power supply; 220V

3. Environmental Temperature: -40～80°C℃

4. Charging Time: ≥8h

Battery: 24VDC, 65Ah

6Manual Ignition: Operated through manual buttons on the control box panel, the ignition duration is controlled by a timer relay (which can be set).

7、Dimensions:1.7*Meters (Height)*0.86Meters (Length)*0.65Meters (width)

8High-voltage cables:Each pieceL=80m。

9、Ignition Gun: (Length and dimensions can be customized according to customer requirements)

L=1000+115mm,Front-end temperature resistance1300℃

Three.Remote ControlIgnition Device Technical Requirements

Remote ControlThe overall performance of the ignition device is by1 independent control unitCartonComposition, controlBoxInternal independent controlOneIgnition devices.AvailableManuallyRemote ControlControlOneIgnition at the pipeline header for road gas pipelines. On-site, the choice of ignition method can be selected according to actual needs.，Each unit controlsBoxThe specific requirements for the ignition device are as follows:

1. The ignition device should be capable of igniting the gas separated from the liquid-gas separator during the gas drilling and well rehabilitation process, or the free gas discharged from the venting pipeline.

2. The ignition device should operate 24/7.

3. Solar-powered power supply unitOneGroup/A standalone power supply, power source availableIndividual orSupply power simultaneously to the ignition control section. Should employA 24V rechargeable battery serves as a safe power source and comes with a solar-powered automatic charging system. The solar charging-discharging controller must be placed inside the main electrical control box. During adverse conditions such as rain, snow, or fog, which are unfavorable for solar use, a 24V constant-voltage power supply can be used on-site. It operates by plugging into the power outlet of the main control box, where the constant-voltage power supply is a (DC24V,500WTo be placed inside the main control cabinet.

4. Each control cabinet features an ignition output control for each unit.OneA control object.

5. The ignition control unit should display battery voltage parameters and be configured with power supplyUnder-voltage indicator lightOn the operation panel, there are a voltmeter and an ammeter each.OnePiece(s).Show battery voltage and current status.

6. Each ignition point (control object) should have a separate pilot gas supply.

7. Inside the control box, the igniter is independently removable.

8、The start-up of the air and electrical circuits is initiated with the same button, simultaneous activation.Or stop。

Section 4: Technical Parameters of Control Cabinets and Air Lines

1、Lead-acid Battery：    24V DC ×65AH Maintenance-free battery

2. Solar Panel Power:1Group×50W/unit (12V), dimensions: 550*670mm

3、Electricity Magnet Valve:    D15, installed inside the control cabinet.

4. High-voltage Cable: Armored Teflon, Ø2.5mm ×80m Protection ≤ 200℃

5. Constant Voltage Power Supply: 24V DC500W

Conductive Rod/Plug: Pulse voltage ≥ 2500V, Temperature resistance ≤ 1200°C, Electric Spark Energy 20 Joules