详情描述

I. Product Introduction:

Plasma Ignition DevicePrimarilyIntrinsically Safe Plasma Ignition DeviceHigh-pressure ignition wires and plasmaIgnition LeverComposed of several parts, this product features a high-performance ignition circuit, ensuring stable performance and reliable operation. It is mainly used in oil drilling exploration and development for burning flammable and harmful gases or waste gases emitted, to eliminate their hazards to the environment and safety. It is a safe and environmentally friendly equipment.

Section II: Key Technical Parameters of Plasma防爆Ignition System

1. Operating Voltage: 220VAC 50Hz

2. Environmental Temperature: -40～80℃

4. Output voltage: 20KV.

Spark Energy: 1000J...Power: 1KW

6. Operation Mode; Manual, Automatic.

7. Ignition rod front end; heat-resistant to 1200 degrees Celsius.

III. PlasmaIgnition DeviceInstallation:

1. The explosion-proof box is mounted near the ignition point. Pay attention to waterproofing the explosion-proof box and cover it with a waterproof and sunshade cover.

2. First, connect the high-voltage to the plasma explosion-proof igniter box.Ignition WireReconnect the plasma ignition rod. And supply the explosion-proof box with a 220V power source.

3. Turn on the 220V power switch button; the power indicator light illuminates, and manually ignite the button; the plasma ignition rod automatically ignites at the front end.

4. The plasma ignition rod produces a plasma arc at the front during operation, with an arc length of about 100mm, capable of completely replacing open flame. Due to the high output voltage during operation of the plasma ignition rod, it must not be touched to prevent safety accidents.

5. Ignition rod installation (threaded connection) is quick and easy; the ignition rod is installed according to the on-site conditions, with a mis-insertion prevention feature for the connection wires.

6. Compared to standard ignition devices, it requires features such as greater energy release, stronger ignition capability, and electrodes that can withstand higher temperatures.

Four: Ignition device external dimensions:

1. Plasma Ignition Unit Control Box Dimensions (approx.): 300×400×200mm

2. Ignition Rod: L=2000mm (Customer-specified customization based on on-site conditions)

3. Ignition rod diameter φ45mm, with the option for a straight shank or a bent rod (customizable according to on-site conditions)

4. High-voltage ignition connection cable: 20 meters. (Customizable according to on-site conditions.)

Section 3: On-site Installation Schematic Simulation of Ignition Device

Ignition System Connection Diagram