详情描述

Product Specifications

Brand: YingTeng

Model: YTZL530M

Test Conditions: 20°C, 60%

Dehumidification Capacity: 2.7 kg/h

Airflow/Excess Pressure: 550/150 PA m³/h

Regenerated Airflow/Excess Pressure: 160/50 PA m³/h

Operating Power / Current: 5kW / 21.7A

Voltage/Frequency: 220V/50Hz

Regeneration Heating Method: Electric Heating PTC

Frame Material: Cold Rolled Steel / Stainless Steel

Electrical Shock Type: Type I

Waterproof Rating: IPX3

Air Filtration Treatment: Pre-Filter G4

Regenerated Air Filter: Pre-Filter G4

Control Method: LCD + Buttons

Length: 1020mm

Width: 563mm

Height: 652mm

Handle inlet: Φ200mm

Handle exhaust: Φ200mm

Regenerated Air Inlet: Φ125mm

Rebirth Blower: Φ125mm


Manufacturer: Henan Tongteng Explosion-Proof Electrical Appliances Co., Ltd.

Note: The above technical specifications are for reference only, and the actual unit should be taken as the standard.

Product Features

Sweden Proflute

The core turbine is equipped with the world-class Swedish Proflute brand, offering an exceptionally long lifespan with 10 years of continuous operation without failure, and maintaining its dehumidifying performance.

SCR

Utilizing SCR energy-saving constant temperature control technology, it effectively ensures the stability of the heating system, allowing for worry-free long-term operation.

Low Dew Point Dehumidification Operation

At extremely low dew points where traditional condensation dehumidification methods can no longer operate, our solution still ensures efficient dehumidification with an expanded dehumidification range.

PTC

The regenerative heating utilizes the latest German PTC thermistor, reducing the PTC's thermal radiation hazard distance. In addition to maintaining the typical characteristics and advantages of PTC thermistor heating, it also improves the regenerative heating efficiency by 10% to 15%, demonstrating significant energy-saving effects.

Reverse Rotation Protection Mode, for added peace of mind

The desiccant wheel features a shutdown protection function, effectively monitoring the wheel's operation to ensure the equipment runs smoothly.

Smart Control System, Precise Humidity Control

Set the target humidity level, and the intelligent control system will achieve automatic and precise humidity control to reach the target humidity.

The core component of the rotary desiccant dehumidifier is a honeycomb rotor, which is made of a special ceramic fiber carrier and an active silicone composite; the rotor is divided into two zones on each side by a custom-made sealing device: the processing zone and the regeneration zone.

As moist air needing dehumidification passes through the wheel's treatment area, the moisture vapor in the wet air is adsorbed by the active silica of the wheel, while the dried air is sent to the space requiring treatment by the treatment fan. The wheel, which continually and slowly rotates, carries the approaching-saturation moisture vapor into the regeneration zone. The high-temperature air blown in reverse within the regeneration zone desorbs the moisture adsorbed in the wheel, which is then exhausted outdoors by the fan, restoring the wheel's moisture absorption capability and completing the regeneration process.

Utilizing imported honeycomb-shaped silicone desiccant rotors, these are assembled into a cylindrical disc with a desiccant and regeneration zone chamber made from ceramic silicone crystallization. Air for dehumidification passes through the desiccant zone, where the rotor absorbs moisture from the air, resulting in dry air. After absorbing moisture, the desiccant zone rotates to the regeneration zone, where heated air carries the moisture out of the rotor and expels it outdoors. Once the moisture is released, the rotor rotates back to the desiccant zone, and the process repeats continuously for stable dry air output.