详情描述

Product Specifications

Brand: YingTeng

Model: YTZL210M

Test Conditions: 20°C, 60%

Dehumidification Capacity: 0.6 kg/h

Airflow/Excess Pressure: 210/60 PA m³/h

Recirculation Airflow/Excess Pressure: 60/50 PA m³/h

Operating Power / Current: 1.2 kW / 5.2 A

Voltage/Frequency: 220V/50Hz

Regeneration Heating Method: Electric Heating PTC

Frame Material: Cold Rolled Steel / Stainless Steel

Touchproof Type: Class I

Waterproof Rating: IPX3

Initial Efficiency G4 Air Filtration Handling

Regenerated Air Filter: Pre-Filter G4

Control Method: LCD + Buttons

Length: 578mm

Width: 421mm

Height: 705mm

Handle intake: Φ125mm

Handle Exhaust: Φ125mm

Regenerated inlet: Φ80mm

Rebirth Exhaust: Φ80mm


Manufacturer: Henan Tongteng Explosion-Proof Electrical Appliances Co., Ltd.

Note: The above technical specifications are for reference only; the physical unit shall prevail.

Product Features

Sweden Proflute

The core turbine utilizes the top-tier international brand Swedish Proflute turbine, offering an exceptionally long lifespan with 10 years of continuous operation without failure, and maintaining its dehumidifying performance.

SCR

Utilizing SCR energy-saving constant temperature control technology, it effectively ensures the stability of the heating system, allowing for worry-free long-term operation of the machine.

Low dew point dehumidification operation

At extremely low dew points where traditional condensation dehumidification methods can no longer continue, our solution still ensures efficient dehumidification with an expanded dehumidification range.

PTC

Regeneration heating employs Germany's* latest PTC thermistor technology, shortening the hazardous radiation distance of PTC. In addition to retaining the typical characteristics and advantages of PTC thermistor heating, it also improves the regeneration heating efficiency by 10% to 15%, demonstrating significant energy-saving effects.

Stall Protection Mode, for added peace of mind

The desiccant wheel features a shutdown protection function, effectively monitoring the wheel's operation to ensure the equipment runs smoothly.

Smart Control System, Precise Humidity Control

Set the target humidity level, the intelligent control system will achieve automatic and precise humidity control to reach the target humidity.

The core component of the rotary desiccant dehumidifier is a honeycomb-shaped wheel, which is made of a special ceramic fiber carrier and composite active silicone; the wheel is divided into two zones by a custom-sealed device on both sides: the processing zone and the regeneration zone.

As damp air requiring dehumidification passes through the treatment area of the wheel, the moisture vapor in the wet air is adsorbed by the active silica of the wheel, while the dried air is then blown by the treatment fan to the area needing treatment. The wheel, which continually and slowly rotates, carries the approaching-saturated moisture vapor into the regeneration zone. Hot air blown in reverse within the regeneration zone desorbs the moisture adsorbed in the wheel, which is then exhausted outdoors by the fan, restoring the wheel's moisture adsorption capability and completing the regeneration process.

Utilizing an imported honeycomb silicone desiccant wheel, the wheel is formed into a cylinder with a honeycomb structure. The wheel is then rotated within a ceramic silicone crystalline body, dividing it into a desiccant area and a regeneration area. Air for dehumidification passes through the desiccant area, where the wheel absorbs moisture from the air, resulting in dry air. After absorbing moisture, the desiccant area rotates to the regeneration area, where heated air carries the moisture out of the wheel and exhausts it outdoors. Once the wheel releases moisture in the regeneration area, it rotates back to the desiccant area, where the process of dehumidification and regeneration continues simultaneously, providing a stable supply of dry air.