详情描述

Product Specifications

Brand: Yingten

Model: YTZL820M

Test Conditions: 20°C, 60%

Dehumidification Capacity: 4.5 kg/h

Airflow/Excess Pressure: 820/200 PA m³/h

Regenerated Airflow/Excess Pressure: 250/100 PA m³/h

Operating Power / Current: 9kW / 13.6A

Voltage/Frequency: 380V/50Hz

Regeneration Heating Method: Electric Heating PTC

Frame Material: Cold Rolled Steel / Stainless Steel

Electrical Shock Protection Type: Type I

Waterproof Rating: IPX3

Air filtration treatment: Initial efficiency G4

Regenerated Air Filter: Initial Efficiency G4

Control Method: LCD + Buttons

Length: 1178mm

Width: 713mm

Height: 790mm

Handle air intake: Φ200mm

Handle Exhaust Air: Φ200mm

Regenerated inlet: Φ150mm

Reclaimed Airflow: Φ150mm


Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.

Note: The above technical specifications are for reference only, and the actual product should be used as the standard.

Product Features

Swedish Proflute

The core impeller is made with the world-class Swedish brand Proflute, offering an exceptionally long lifespan with 10 years of continuous operation without failure, and maintaining its dehumidifying performance.

SCR

Utilizing SCR energy-saving constant temperature control technology, it effectively ensures the stability of the heating system, allowing for worry-free long-term operation.

Low dew point dehumidification operation

Even under extreme conditions where traditional condensation dehumidification methods fail due to very low dew points, our system still ensures efficient dehumidification with an expanded dehumidification range.

PTC

The regenerative heating employs Germany's latest PTC thermistor, reducing the dangerous distance of PTC's thermal radiation. In addition to maintaining the typical characteristics and advantages of PTC thermistor heating, it also boosts the efficiency of regenerative heating by 10% to 15%, with significant energy-saving effects.

Reverse Rotation Protection Mode, for Added Peace of Mind

The dehumidifying drum features a stop rotation protection function, which can effectively monitor the drum's operation status, ensuring the equipment operates normally.

Smart Control System, Precise Humidity Control

Set the target humidity level, the intelligent control system will achieve automatic and precise humidity control to reach the target humidity.

The core component of the rotary desiccant dehumidifier is a honeycomb-shaped wheel, which is composed of a special ceramic fiber carrier and an active silicone composite; the wheel is divided into two zones on each side by a custom sealing device: the treatment zone and the regeneration zone.

As humid air requiring dehumidification passes through the treatment area of the wheel, the moisture vapor is adsorbed by the active silica of the wheel, while the dried air is blown to the space that needs treatment by the processing fan. The wheel, which rotates slowly and continuously, carries the approaching-saturated moisture vapor into the regeneration area; the hot air吹入再生区 reversely, causing the adsorbed moisture in the wheel to desorb, and the fan exhausts it outdoors, restoring the wheel's moisture absorption capability and completing the regeneration process.

Utilizing imported honeycomb-shaped silica gel desiccant rotors, these are formed into cylindrical disks with a honeycomb structure. The desiccant and regeneration zones are contained within a ceramic silicone crystal-constructed chamber, rotating. Air used for drying passes through the desiccant zone, where the rotor absorbs moisture from the air, resulting in dry air. After absorbing moisture, the desiccant zone rotates to the regeneration zone, where heated air carries out the moisture from within the rotor and exhausts it outdoors. The rotor, having released moisture in the regeneration zone, rotates back to the desiccant zone to continue the cycle. This process provides a stable supply of dry air.