详情描述

Product Specifications

Brand: YingTeng

Model: YTZL1050M

Test Conditions: 20°C, 60%

Desiccant Capacity: 7.2 kg/h

Airflow/Excess Pressure: 1100/200 PA m³/h

Regenerated Airflow/Excess Pressure: 380/150 PA m³/h

Operating Power / Current: 11.8kW / 18.5A

Voltage/Frequency: 380V/50Hz

Reclaimed Heating Method: Electric Heating PTC

Frame Material: Cold Rolled Steel / Stainless Steel

Type of Protection Against Electric Shock: Class I

Waterproof Rating: IPX3

Air Filtration Treatment: Initial G4

Regenerated Air Filter: Initial Efficiency G4

Control Method: LCD + Buttons

Length: 1370mm

Width: 1120mm

High: 720mm

Handle air intake: Φ200mm

Dealing with Ventilation: Φ200mm

Regenerated Air Inlet: Φ160mm

Rebirth Exhaust Fan: Φ160mm


Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.

Note: The above technical parameters are for reference only, and the actual product should be used as the standard.

Product Features

Sweden Proflute

The core impeller is equipped with the top-grade Swedish brand Proflute, boasting an exceptional lifespan with continuous operation for 10 years without any fault and maintaining its dehumidifying performance.

SCR

Utilizing SCR energy-saving constant temperature control technology, it ensures the stability of the heating system, allowing for worry-free long-term operation.

Low Dew Point Dehumidification Operation

Even in extreme environments where traditional condensation dehumidification methods fail due to very low dew points, our system still ensures efficient dehumidification with an expanded dehumidification range.

PTC

The regenerative heating utilizes the latest German PTC thermistor, shortening the PTC's thermal radiation hazard distance. In addition to maintaining the typical characteristics and advantages of PTC thermistor heating, it also improves the regenerative heating efficiency by 10% to 15%, demonstrating significant energy-saving effects.

Stop Turn Protection Mode, for Added Peace of Mind

The desiccant wheel features a shutdown protection function, which effectively monitors the wheel's operation to ensure the equipment operates normally.

Smart Control System, Precise Humidity Control

Set the target humidity level, and the intelligent control system will achieve automatic and precise humidity control to reach the target humidity.

The core component of the rotary desiccant dehumidifier is a honeycomb rotor, which is composed of a special ceramic fiber carrier and composite active silicone; the rotor is divided into two zones by a custom-made sealing device on both sides: the treatment zone and the regeneration zone.

As moist air needing dehumidification passes through the treatment area of the wheel, the water vapor in the moist air is adsorbed by the active silica of the wheel, while the dried air is sent to the space for processing by the treatment fan. The wheel, continuously and slowly rotating, carries the approaching-saturated water vapor into the regeneration area. Hot air blown in the opposite direction within the regeneration zone desorbs the moisture adsorbed in the wheel, which is then exhausted outdoors by the fan, thereby restoring the wheel's moisture absorption capability and completing the regeneration process.

Utilizing imported honeycomb-type silicone desiccant rotors, the rotors are structured into cylindrical disks with a honeycomb design. These disks then rotate within a housing containing desiccant and regeneration zones, made of ceramic silicone crystals. Air to be dehumidified passes through the desiccant zone, where the rotor absorbs moisture from the air, resulting in dry air. The desiccant zone, after absorbing moisture, rotates to the regeneration zone, where heated air carries the moisture out of the rotor and expels it outside. Once the moisture is released in the regeneration zone, the rotor rotates back to the desiccant zone, where the cycle repeats for continuous dehumidification and regeneration. This process provides a stable supply of dry air.